AViCAD 2022 is available.. This version includes many improvements. It’s our fastest and most reliable version ever. See below for a list of other AViCAD improvements over time.
Click here to request an upgrade
Below is a history of recent updates to AViCAD.
Changelog version 22.0.14
- Right click menu is now regulated only by the variable SHORTCUTMENU
- Now creating a new table style copies the base one successfully
- Fixed Table Styles preview
- Added double click to edit block in table cell
- Fixed crash on edit table cell with block. Using “Format Locking” option
- Added “Block” button to “Insert” panel of “Table Cell” contextual ribbon
- Added TBB and TINSERT aliases of TABLEINSERTBLK command
- Added “Match Cell” and “Field” buttons to Table Cell context ribbon
- Fixed SUPERHATCH with circle island in area
- Fixed SUPERHATCH with rectangular “hole” in area
- Fixed crash selecting specific hatch
- Fixed zoom on entity in FIND command without “zoom after replace” option
- Margins set in Table Style are now loaded correctly in table creation menu
- Fixed EATTEDIT prompt messages
- Fixed open of drawing with bad constraints
- Fixed behavior of prompt boxes. Added new variable PROMPTBOXES to enable/disable prompt boxes.
- Fixed prompt menu when command is not active
- Added “Alignment” button to the Table toolbar for the Classic workspaces
- Fixed crash using table with block in cell
- Fixed freeze searching closed boundary in a drawing
- Fixed ARC command from Lisp
- Fixed contextual menu on mouse button down
- Removed display of options list when DYNMODE < 0
- Changed ZOOM level on FIND command, Implemented FINDZOOMSCALE variable to set scale zoom level (default 5.0)
- Improved drawing templates dropdown menu in Start Page. Now it will display a vertical scrollbar if the list of the templates is too long
- Structural Handrail – added Welded and Square Tube option
- Structural Welding Symbols – added option to add size by manual entry
Changelog version 22.0.12
- Fixed display of broken mechanical entities
- F12 key didn’t change Dynamic Input icon in Status bar
- VBA: Changed SendCommand to make it sync with VBA execution. Added SENDCOMMANDSYNC variable to restore previous behaviour
- Fixed PUBLISH of multiple DWF files
- Fixed polar ARRAY ribbon controls to change angle filled, angle between
- Fixed fade of entities outside of refedit set starting REFEDIT command
- VBA: Fixed Boolean operation on regions
- Fixed print and preview of OLE objects in block in paperspace
- Users can now choose if the dragged file onto the drawing area is opened or imported into the current drawing
- Now TXTEXP command explodes pre-selected entities
- Now BURST command explodes pre-selected entities
- Added tooltips for NETWORKSEARCHTIMEOUT in performance Dialog
- Improved speed of open of drawing with 3d solid objects
- Improved speed of Esnap over 3d solids
- Fixed enter of multiple point text in table cell
- CHANGELOG: Fixed freeze using esnap on big block
- Users can now choose if the dragged file onto the drawing area is opened or imported into the current drawing
- Now TXTEXP command explodes pre-selected entities
- Now BURST command explodes pre-selected entities
- Added tooltips for NETWORKSEARCHTIMEOUT in performance Dialog
- Improved the message box that is displayed after user released tokens in NLM Server Monitor
- Improved response of click over tool palette
- VSLIDE not hiding background drawing
- Fixed pointer behavior in SOLIDEDIT command
- Fixed area of hatches
- Fixed calculation of hatch area in case of trimmed hatches
- Fixed set of columns and rows of rectangular array using dynamic input controls
- Fixed ROTATE command with DININPUT,ANGBASE/ANGDIR modified
- Fixed grip position of rotated array objects
- Fixed Page Setup associated to a Layout Space not visible in Plot dialog
- Fixed crash using QDIM command
- Fixed change of XCLIP boundary on block pasted in another drawing
- Fixed crash in property palette
- Fixed EXPORT command when file already exists
- Fixed crash with SETTINGS dialog with AECOBJECTS = 0
- Fixed regen of xclipped blocks using clip frame grip
- Improved DWG file extension association to AViCAD
- Fixed crash in image manager drawing images stored on unresponsive file system (NAS)
- Reduced size of DXF file removing preview image from file
- Fixed pick of first point of MLEADER with ESNAP
- Fixed crash closing palette activating a drawing from start page
- Fixed grip edit ESNAP now prevails over ORTHO and GRID
- Properties height and width of Custom Paper size when plotting PDF with the AViCAD Virtual Printer are limited to 3200 mm (or 126 inches). To achieve higher page sizes use ADDFORMAT
- Using command BEDIT on dynamic blocks now tells the user to use REFEDIT command instead
- Added zoom option to FIND dialog
- Added IGESSTEPEXPORTSCALE variable to options dialog(command IGESSTEPOPTIONS)
- Fixed IGESOUT/STEPOUT command to be used from scripts
- Fixed color names in the non-English version of the Selection Palette
- Slow switching when editing table cells
- Fixed message in WIPEOUT command
- Added extension DWFX to DWFIN command
- Fixed ESNAP center of closed splines
- Improved speed to show BEDIT dialog with many blocks
- Added dxf format to publish
- Fixed LMAN dialog to restore layer settings
- Fixed hatch boundary recognition in some drawings
- Partially fixed wrong PREVIEW of DIMENSIONS TEXT during COPY>PASTE operation
- Fixed set and save of crosshair related colors
- Fixed vl-princ-to-string to deny print of source of lisp function
- Fixed selection command with lower case letters, in dynamic input list
- Fixed CENTERLINE command
- Added REVERSE command
- Fixed Crash with Zoom Extents
- VBA: Fixed VBA area property of hatch
- Fixed area calculation in specific hatch
Changelog version 22.0.10
- Fixed Mech-Q CUI compatibility issue
- Fixed creation of dimensions with scrollbars on
- Fixed NODE snap with PDMODE different from 0 on points in block
- Fixed OVERKILL with overlapping circles
- Fixed hide/display of entities turning on/off a layer
- Fixed height of solids operations (EXTRUDE, BOX, etc) with architectural units
- Fixed MULTIPLOT with combine option enabled on AViCAD in C: disk.
- Fixed crash getting area of hatch with bad polyline boundary
- Added some option to PUBLISH dialog : optimized PDF, open file after generation, hatch creation, merge color of crossing lines
- Implemented variable PUBLISHPDFTYPE to use different PDF generation to create smaller PDF files
- Fixed display of lineweight in a drawing
- Add support for Alt+Return to create multiline text in table cells
- Implemented setup of NVIDIA profile for QUADRO GPU, added SETNVIDIAPROFILE variable to control change of NVIDIA profile
- Fixed lisp function vlax-curve-getParamAtPoint
- Fixed battman command
- Fixed box command with rotated UCS
- Fixed placement of hatch in closed area
- Fixed rotation point specifying reference angle and points
- Fixed position of ruler in MTEXT editor with a specific text
- Fixed open of file from read-only path
- Fixed search of rcs file in subfolder of rcp file
- Improved creation of ARC/CIRCLE in FLATSHOT/SOLPROF commands
- Fixed extrusion height and direction using esnap
- Improved open of drawing with images on missing network path, Improved IMAGE dialog using images on missing networkpath. Added NETWORKSEARCHTIMEOUT variable to control network search timeout
- Improved speed of print from layout
- Fixed DIMBREAK manual option
- Fixed PASTESPEC of excel table containing korean text
- New method(properties dialog) to associate dwg to AViCAD
- Improved speed of execution of LISP
Changelog version 22.0.6
- Fixed crash in options dialog
- Fixed crash closing AViCAD
- Fixed count of files to delete in temp path
- Fixed display of RCP/RCS point cloud
- Fixed problem using a drawing on QUADRO video card
- Fixed Korean texts not being displayed correctly in “New Sheet Set” wizard
- Fixed size of a few controls in “New Sheet Set” wizard
- Implemented new faster OVERKILL command, old version renamed to LEGACYOVERKILL
- Fixed SCALE precision using expression with dynamic input
- Partially fixed HATCH boundary calculation with HPISLANDDETECTIONMODE = 0
- Improved speed of load and display of PCG point clouds
- Fixed load of PCG point clouds
- Removed lock of application displaying preview of block in REFEDIT and BEDIT dialogs
- Fixed creation of dimensions in paperspace using esnap to modelspace entities
- Fixed open of drawing with MAP objects
- Fixed SUBTRACT command that creates corrupted 3d solid entity
- Fixed box command with rotated UCS
- Fixed order of papers in paper margin dialog
- Fixed set of paper margins using PMP files
- Fixed wrong large icon for the “Pin the Toolbar to Current Position” button of the MTEXT toolbar
- Fixed fast command start typing only a part of command (eg : DATA for DATAEXTRACTION)
- Added “View Transitions” button in Options dialog
- Improved speed of cursor typing commands
- Fixed esnap on LWPOLYLINE with coincident points
- Fixed selection delay in a drawing with many groups
- Changed ZOOMTIMEOUT behaviour : after timeout now AViCAD draws 1 entity every 20 inside blocks
- Fixed display of entity after ZOOM with RTDISPLAY = 0
- Fixed loose of bitmap changing position of toolbar button
- Fixed NETLOAD command requesting DLL name twice
- Fixed crosshair cursor during input of command
- Fixed COPYCLIP of set of entities with some proxy
- Fixed IMPORT of IFC file with errors in representation
Changelog version 22.0
- Intellicad 10.1 engine
- The most recent IntelliCAD source code
- ODA Geometry library
- Improved Spline support, better boundaries recognition, fixed many geometrical issues on
- Trim, Chamfer, Fillet etc.
- Dynamic input feature on Grips
- TABLE and TABLEDIT implementation
- AutoCADⓇ like Text in-place editing, numeric Rows and alphabetical Columns. New
- contextual Ribbons.
- New AEC Objects (AutoCADⓇ Architecture)
- New 3D Walls, Doors, Windows, Stairs, Railings, Slabs, Roofs
- Wood Details, Steel and Profiles Standards
- Now available in 3D
- Background map from Bing
- Assigns geographic location information to a drawing file. Captures a portion of the online map
- to an object known as a map image, and embeds it in the drawing area. New Contextual
- Ribbons.
- AutoCADⓇ Like Solid grips
- Use grips to change the size and shape of 3D solids and extruded surfaces.
- Autodesk RevitⓇ 2021 Import/attach
- Support for recent Revit files format
- Smooth Transition
- Makes a smooth animated view transition during panning, zooming, or changing view angle
- Improved Array
- – New Array Grips
- – New contextual Array Ribbons
- Search in Options and Drawing Settings Dialog
- Typing the name of the options, automatically find the relative control in the form. Speed-up
- settings.
- Sheet Set Manager
- The Sheet Set Manager organizes, displays, and manages sheet sets, a named collection of
- drawing sheets. Each sheet in a sheet set is a layout in a drawing (DWG) file.
- BACKGROUND command
- Defines the type, color, effects and position of the background for the named views.
- Refactored View Manager Dialog
- Interactively manage drawings views
- Refactored perspective mode
- Improve Perspective handling and grips in Perspective views
- Improved Open, Regen and Layout switch performances
- Improved Osnap
- Faster and more accurate
- New TPNAVIGATE command
- Displays a specified tool palette or palette group. Improved GUI customization.
- MTEXT
- -Add “Strikethrough” option
- -Insert “text only” functionality. PasteSpecial formatting
- -Clear formatting feature
- -Text Symbols Subscript and Superscript are added
- -Added “Paragraph” dialog
- -Spell check on the fly
- SPELL for MLEADER
- GROUP handling
- – GROUPEDIT: Add, Remove and rename features for Groups
- – Group Grips: improved visualization of Groups
- New commands TOTALAREA
- Calculate the total Area of selected closed entities
- Improved Dynamic Blocks handling
- New insertion options supported
- Command IMPOINT
- Imports 2D-3D points with specified coordinates from a .txt or .csv file into a drawing. Points
- can be imported as separate point entities, as vertices of a polyline, or as vertices of a
- spline.
- Improved 3D Connexion mouse support
- Optimized selection performance
- SVIMPORT/SVEXPORT commands
- Import/Export of all AViCAD Variables
- Improved performance for Lisp GRDRAW
- NET PalettesSet feature
- .NET API to create palettes with .NET controls on it
- Improved CUI Dialog for customization
- PLUS the Brand new: Mech-Q Engineering Suite: v4.27
Changelog version 21.0.6
- Fixed speed of selection of 2d Polylines with many vertexes (+10k)
- Fixed FLATTEN command with 3d Solids objects
- Added message for unsupported Revit file version
- Fixed APPLOAD command to load lisp that contains COMMAND
- Fixed purge of Dynamic blocks to avoid delete of referenced dynamic blocks
- Implemented print of TIFF file using JPG printer
- Fixed selection speed in drawing with too complex hatch, ignored (not regenerated) hatches with more than 5000 loops.
- Implemented sysvar fields in FIELD command
- Reduced size of objects pasted in Word-Excel, Added EMFFACTOR and WMFFACTOR to change size factor of EMF and WMF created during COPYCLIP
- Improved PDF2CAD command: now it will display only one message if some of the input files were skipped during Batch conversion.
- Improved PDF2CAD: handled skipped files Improved “Single File” mode tab: now it will display an error if invalid PDF file is selected Code Cleanup
- Disabled thumbnail generation during autosave to increase speed of autosave
- Fixed OFFSET with lines standing on different Z levels
- Fixed the initial height of the DWG Preview in Open File dialog
- Restored vertex grips of non associative hatch created selecting objects
- Property palette :Fixed change of number of items and angle between items of polar array if angle is less than 360∞
- Fixed print of images with a page size larger than A3
- Fixed lag after copy of block
- Removed “last access” from open/save dialog
- Fixed a bug in DATAEXTRACTION dialog when user is unable to move from step “Data Source” to step “Select Objects”.
- Fixed default option not being recognized by PCAD in a few prompts of the _3DARRAY command
- Property paleete: Fixed change of total angle of polar array if angle is less than 360∞
- Fixed speed of COPY of some specific blocks in a big drawing
- fixed the command bar position in a Multi-Monitor context. Now it appears on the correct monitor when the AViCAD startup.
- Fixed temporary OSNAP in ZOOM window command with OSNAPCOORD = 2
- Fixed zoom and pan with ZOOMDETAIL = -1
- Fixed update of Quick property palette changing color with ribbon or toolbar combobox
- Fixed insertion of blocks from tool palette: layer names and other styles coming from inserted blocks are preserved
- Print: removed message and popup about 3d hidden/shaded view and plot styles
- Fixed EXTRUDE direction option with NWUCS
- Fixed ELEVZERO command with REGION objects: the command now filters out REGION objects
- Fixed display of main window during application startup
- Fixed ESNAP and ETRACK markers in diffent VPORTS : Restored SNAPALLVIEWS to 0
- Changed selection windows to display only in active window
- Quick Property: added a limit to height max to 750 pixel, added scroolbar when exceed to height limit
- Improved speed of command hint list with great number of results
- Added OneDrive business path to cloud commands
- Fixed load of some commands opening drawing with double click on PC with QUADRO video cards
- PDF2CAD : Fixed crash when attempting to show preview of a protected PDF file.
- Fixed display of DGN underlay
- Fixed wrong DIST result on layout Viewport
- Implemented dimension scale depending from layout viewport scale
- Implemented PURGE of empty text objects
- Fixed APPLOAD of .NET modules , filename is not requested twice
- Fixed exception finding hatch boundary
- Added IMPROVETEXTQLTY variable to HWCONFIG dialog
- Fixed delete of unused files in temp and in backup folder, changed number of backup files to 2, changed remove of old backup file controlled by BACKUPOPEN variable
- Added check to avoid crash using layout tab during block editor
- Fixed explorer preview pane after AViCAD start
- Fixed edit of text of annotative dimension
- Fixed activation/deactivation of POLAR and ORTHO passing from one drawing to another
- Fixed problem using PUBLISH with our PDF printer, added license activation and set options for each page
- Fixed open time and anomal memory usage opening drawing with clipped blocks
- Improved speed of regeneration of TTF text
- Added IMPROVETEXTQLTY variable to enable or disable change of TEXTQLTY variable opening drawing
- Fixed DIMRADIUS command when circle stands on z plane different from current elevation
Changelog version 21.0.0
- START PAGE
The new Start tab is displayed by default at startup, providing easy access to a variety of initial actions, including access to drawing template files, recently opened drawings as well as online and learning resources. - PDF2CAD 2.0
The New conversion engine with pages preview and such new options as Batch conversion of all PDFs in a folder, multi-page PDF conversion, dashed lines recognition, plus dozens of other important improvements. - PDF with Append function
The Append function allows to add a new sheet to an existing PDF to create multi-pages PDFs when printing different views of a drawing or different drawings. - SELECTION CYCLING
The control of selection when you select an object that overlaps other objects. Cycling through overlapping objects makes your selection extremely easier. - QUICK PROPERTIES Palette
The Quick Properties palette shows a list of object properties for one or more selected objects. Rapid access to the most useful object properties avoiding irrelevant and confusing fields. You have the Quick Properties palette beside the cursor when clicking on an object. - IMPROVED TOOLPALETTES
– Palette Groups split panels by topic with the possibility to filter their visibility in a click
– Import/Export Single Panel .XTP files (an easy sharing of customization with colleagues)
– Images/Icons Manager
– Import AViCAD 2020/21 Toolpalettes from the full .ATC files ( You can import customized toolpalettes from your AViCAD 2020)
– AddBlocks. The new function allows the massive addition of multiple blocks in the Toolpalette. - QRCODE
Create and insert a QRCODE from any text, URL etc.
Make text in your drawings scannable from QR Codes using any mobile phone or tablet with a camera.
QR Codes, also known as mobile barcodes, allow to represent text, URLs, contact information etc.
Users may get automatically a lot of useful information for execution of maintenance, simply scanning the QR Codes visible in the drawings. - New PARAMETRIC 2D LIBRARY
Parametric generation and insertion of mechanical/structural components for construction using a dedicated interface:
– Wood: Lumber, Trus Joist® TJI®
– Steel: Angle, Channel, Tubing, Pipe, S-W-M-HP Shape, S-M-W Tee Shape
– Steel: Studs, Sstuds, Joist, Track
Two Tool Palettes for the new Structures library are provided, ready to use (Steel standard, Profiles and Wooden details) - AUTOPUBLISH
The command automatically creates export files (.dwf/.pdf) from the current drawing and saves to a specified location on saving or closing the DWG file. - Improved print preview speed
Faster preview creation. Immediate zoom on details. In addition, you can now scroll the preview using the mouse wheel to zoom and pan. - New predefined Ribbon Workspaces
Beside the normal complete Full Ribbon interface, there are two more pre-sets ready-to-use:
1. “Beginners” – for users just starting to learn CAD or working on simple drawings. It shows only the basic CAD functions, making easier CAD usage by not skilled users.
2. “2D Drawing & Annotate” – the complete set of 2D functions for users who don’t need 3D and prefer a clean workspace. Allowing a faster detection of commands. - New POLYGON GRIPS
Enable to display a new set of grips for rectangles or polygon polylines. Enhanced options to stretch, rotate or scale polygons. - New POLYGON PROPERTIES
Enable a set of new properties in order to better manipulate regularly-shaped polylines (rectangles or polygons) - ROTATE on PASTE and PASTEBLOCK
Now you can rotate entities while performing Paste operations for a direct alignment of elements. - Improved MTEXT
– new functions to Paste text without formatting
– new functions to Remove formatting of the selected text
– new settings for the in-place background color
– the new annotative button in the MTEXT editor - Associative ARRAY
AViCAD can now create Associative Arrays entities editable through the properties panel. It is now extremely easy to dynamically modify a number of items, rows, colums, angles, rotation etc.ARRAY. New direct commands:
ARRAYPOLAR. The command evenly distributes object copies in a circular pattern around a center point or axis of rotation.
ARRAYRECT. The command distributes object copies into any combination of rows, columns and levels.
ARRAYEDIT The command modifies associative arrays by editing array properties, editing source objects, replacing items with other objects or creating a 3D array with objects on 2 or more 3D levels automatically. - Section and Elevation lines
Creating 2D sections and elevations from 3D models in your drawings. You can control the size and shape of any created section/elevation and dinamically update an existing section/elevation when the objects included in the section/elevation are modified. The feature is similar to those available in AutoCAD Architecture. The Commands can be applied on al 3D objects, including IFC and Revit Underlayers/imported models. - AREA command improved
The command shows a colored preview area selection. Also implemented the area calculation by pick point. - Improved graphic performance
Two new options can be used to improve the performance in some specific circumstances:
– “Use Frame buffer object display system” reduces GPU memory usage, can be helpful with the integrated graphic card.
– “Hide small entity in block” simplifies drawing visualization hiding the smallest objects of blocks, useful in large drawings with many blocks.
– Improved speed in drawings containing cropped Xrefs and large Xrefs.
– Better visualization for 3D drawings in Conceptual and Realistic mode.
– Cleaner edges with ISOLINES.
– Greater working speed and management of drawings with active shading. - MEASUREGEOM
The command measures distance, radius, angle and area of selected objects or a sequence of points. - DATAEXTRACTION
Extracting information from objects such as block attributes and drawing properties and creating a detailed schedule, a parts list, or a bill of materials to a table inside a drawing or into an external file. For example, with a residential construction project, create a door installation schedule to place in the drawing. Using the Data Extraction wizard, you can limit the selection only to doors objects and extract the data. You can create a list as an Excel external file as well. You can use a data extraction file as a template to perform the same type of extraction at any time. - ATTOUT – ATTIN
Import/Export block attribute values from/to an external file in the tab-delimited ASCII format. - VPLAYER
Sets layer visibility within viewports. In a layout, you can assign a set of unique display properties for each layout Viewport. These settings override those in the Model tab and controlled by the layer manager palette. VPLayer works on Color, LType, LWeight, Pstyle, Transparency, Visibility (Freeze-Thaw). - SELFILTER
Controls the Selection Filter panel. It displays all entities in the drawing and allows you to filter and select entities by Layer, Color, entity Type and Linetype. When you finish selecting entities, you can then use the selection set in subsequent commands. - Toggle FULL SCREEN MODE
Clears the screen of Toolbars, Ribbons, Palettes and dockable windows, excluding the command window, to maximize the drawing area. - THICKEN
Converts a surface into a 3D solid with a specified thickness. - CONVTOSURFACE
Converts 3D solids, meshes and 2D geometry to procedural surfaces.
The command works on closed 2D entities, 3D solids, regions, mesh entities, 3D faces and lines, arcs and open polylines with thickness. - CONVTOMESH
Converts 3D solids, polyface meshes and polygon meshes, regions and closed polylines to mesh entities. - CONVTOSOLID
Converts eligible 3D objects to 3D solids. - IMAGECLIP on boundary
A new option to use a Polyline as a clipping boundary. - Improved REDCLOUD
New options: Rectangular, Circular and Elliptical. Now you can draw Revclouds with a specific shape using the classic or calligraphic mode.
Alternatively, create a Revision cloud directly by selecting an object and transforming it. - POINTCLOUDBOUNDARY and POINTCLOUDPOINTSIZE
The commands control whether the point cloud bounding box is displayed and the size of the points for point cloud objects. The points size is enabled for RCP and RCS point clouds only. - CAMERA
Sets a camera and target location to create and save a 3D perspective view of objects. - UNDO Step
Undoes commands selecting from a list showing all the commands executed. - New EXPRESS TOOLS
– SLOPETEXT creates a text, aligned to the entity with the slope value of a line or a polyline segment.
– COORDSLABEL creates a text label with the XY or XYZ coordinates value of a selected point, with or without a leader.
– DIMPOLYALIGNED automatically creates aligned dimensions around the selected polyline using its vertices. - – MERGEHATCH merges the selected hatches by applying the corresponding properties.
Changelog version 20.0.8
- Fixed color of edges to color of 3d solid entity
- Fixed Fit option of MVIEW command
- Fixed linetype combo in property palette: removed duplicate of *Varies* linetype
- Fixed save as dwg 2004 of drawings with non latin characters in layer or layout names
- Fixed crash while copying and pasting special associative dimensions
- Fixed dynamic input specifying Z coordinate
- Fixed crash when copying unicode text
- Fixed crash closing ARTISAN’s render dialog
- Fixed wrong hatch selection when clicking on an empty pattern in “ANSI”, “ISO” and “Other Predefined” tabs in “Hatch Patterns” dialog. Graphically improved the selected pattern by drawing a red border around it
- Fixed the CAMERA command that didn’t use the CAMERAHEIGHT variable correctly
- Fixed crash in layer palette
- Fixed crash when executing BEDIT during the session of another BEDIT
- Fixed hatch not copying background color using _MATCHPROP command
- Made _FIND dialog smaller and now there is the possibility to expand it
- Fixed scroll on grid tooltip in property palette
- Fixed compound tangent snap to circle specifying second point with angular coordinate (eg: 100<45)
- Fixed _TABLE insertion using “specify window” option
- Fixed linetype color in “Appearance” column of _EXPLTYPES dialog being always black
- Fixed text color in “Font Name” column of _EXPFONTS dialog being always black
- Removed useless REGEN after REFCLOSE
- Fixed lisp GETENV function to load variable also from registry
- Fixed the way TARGET system variable is handled in a few commands of EasyArch
- Fixed update of dimension associated with 2d polyline
- Added column sorting when clicked on column header in _EATTEDIT dialog
- Fixed crash in shape importer
- Fixed crash in hatch dialog
- Fixed dimensions are modified with print window
- Fixed open cad object from excel
- Fixed crash at closing time.
- Fixed usage of font Typo_SsangmunDongStencil.ttf
- Fixed display of a specific text using just installed specific fonts
- Fixed APPARENT intersection of a 2d line perpendicular to view plane
- Fixed DIMBREAK of extension lines of aligned and rotated dimension
- Fixed dwg preview not visible in windows’ explorer preview pane
- Fixed color of some entities in blocks using DISPLAYLIST ON
- Added message at end of “Rebuild all” option
- Fixed DIMBREAK command to use only selected entities
- Fixed linetype of circle created by 2 arcs with OVERKILL command
- Fixed TANGENT snap moving line grip and using deferred tangent with dynamic input
- Added isolines properties to Swept surface and added other geometry properties disabled due to unsupported operations
- Fixed memory exception in ADDFORM dialog
- Managed “*” as filter in tool palette “add blocks” feature
- Fixed property palette with extruded surface, added other properties to control height and angle of extrusion
- Fixed PASTESPEC to create table object using data from Excel
- Fixed speed of selection using property palette
- Fixed dynamic input with negative value for single edit control
- Fixed COPYCLIP in a specific corrupted drawing
- Fixed ‘*’ in menu macro to repeat all macro instead only one command
- Fixed poor performance opening a drawing or shading
- Fixed Drag jig failing for rotation angle when Ortho is On
- Added LOADDOTNETWITHQUADRO variable to enable/disable load of .NET with QUADRO video cards
- Added “Misc” tab in nlm server monitor Added custom token description management in this tab
- Added check to avoid crash using DIMENSION with Intersection esnap
- Fixed XREFNOTIFY not handling DWGs with an absolute path but are not there because they are in the same folder as the main dwg
- Fixed XREF not being inserted using the “No path” option
- Filter selection is not working correctly when changing layout with model space
- Fixed -ARRAY command with 360 degree
- Fixed FROM using keyboard
- Fixed CIRCLE with 1 pt + 2 Tangents to lines
- Fixed size of dots in dynamic input in drawings that redefine custom “_Dot” block
- Fixed use of expression in dynamic input with single control
- Fixed print of long paper size (9000mm) using custom paper size added as form (using ADDFORMAT command or with some: drivers HP DJ T930 V4)
- Fixed Snap to 0 length polyline in a block
- Fixed save of wrong publish DSD file
- Fixed problem of display of objects on OFF layers after LAYISO command
- Fixed set of active CTB from plot dialog after run of VBA routine that sets same parameters
Changelog version 20.0.6
- Fixed fade of refedit
- Fixed context menu and prompt menu according to SHORTCUTMENU variable
- Fixed substr LISP function with Unicode strings
- Fixed DIMCONTINUE on polyline with INTERSECTION esnap
- Fixed BOX command with esnap with NWUCS
- Fixed export of 3D PDF using EXPORT command
- Fixed _ALIASEDIT command not updating the right pane in customize dialog
- Fixed display of Full Drawing Path,shown in title bar when option is disabled
- Fixed usage of Unicode string from lisp, fixed getmess function and lisp strcat
- Fixed STEP import crash
- Fixed BOX with dynamic UCS with esnap
- Handled Unicode Strings in Filter Dialog
- Fixed BOX with 2 esnap points
- Fixed APPLOAD command with network path
- Removed point on optimized entities during PAN and ZOOM
- Fixed Center option of TEXT command from script, added dynamic UCS to interactive part
- Fixed creation of box using esnap and starting from elevation
- Fixed remove of entities using SHIFT from selection set of STRETCH command
- Fixed DIMCONTINUE on polyline with INTERSECTION esnap
- Fixed HELIX command
- Fixed POLYSOLID justification using a session variable
- Fixed selection of HATCH, now PICKSTYLE is controlled during GROUP selection
- Fixed arrow keys not moving the editing cursor in dcl edit box
- Fixed DCL dialogs positioned incorrectly on multi-display configurations
- Fixed BOX command starting a different Z and using Osnap
- Fixed search of pcad.pat and pcadiso.pat file to load hatch patterns
- Fixed mtext not fully considered in zoom extents
- Fixed SWEEP with helix as path
- Fixed FILLET with PLINETYPE = 0
- Fixed missing option in JOIN command on arc entities
- Fixed SLOPEBLOCK command adding a question to remove or not last entity created
- Fixed face extrude with negative taper angle
- Fixed WEDGE command with Center option
- Fixed _STYLE dialog not closing after pressing “ESC” key after having clicked on Apply button
- Wrong view in viewport with rotated UCS Disabled FIELD button in text editor
- Added another Lock file type (LOCKFILEMODE variable) to allow update of drawings for wider range of cad
- Fixed Length option of BOX command
- Fixed selection of MLEADER text also when arrow is not present
- Fixed hatch in a drawing
- Fixed extra trim when Save button is pressed in Edit Table Cell Dialog
- Fixed BEDIT inside another BEDIT session
- Fixed trim in a specific condition
- Fixed BOX command setting height with second point z coordinate
- Fixed crash with COPY command in a drawing with constraints
- .Net : Implemented Document.Window property and IntelliCAD.Windows.Window class
- Fixed save of RASTERPREVIEW variable between sessions
- Fixed layer property of FIELD object
- Fixed move of linear dimension created selecting a subentity of a block
- Fixed deferred tangent of 2 circles using SHIFT+RX click menu to select esnap
- Fixed JOIN command of two arcs to create a circle
- Fixed display of polyline entities with arc segments with bulge near to zero
- Fixed set of center of circle using @ to get last center of previous circle
- Updated tolerance in a DynVCT script
- Fixed erase of some dimension with bad dimbreak information
- Fixed FADE during REFEDIT in some circumstances
- Fixed rotate face, removed useless offset
- Fixed display of JP2 raster images
- Fixed properties of MTEXT display in QSELECT
- Improved speed of images during PAN and ZOOM with MTMODE = 3
- Lisp: Fixed VLAX-CURVE functions with entity name
- Fixed crash with COPYCLIP of a malformed spline
- Fixed usage of some TTF fonts not recognized on Win10 ver 1903
- Fixed file finder from OPEN/SAVE dialog
- Fixed name of page format when changing units in “_ADDFORMAT > new” dialog
- Fixed VPCONTROL variable range
- Fixed _LOFT command not using graphically closed polylines
- Fixed Digital Signature multiple error prompts
- Added MS and PS aliases for MSPACE and PSPACE commands
- Fixed overridden dimension style in BEDIT session, incremented variable number to copy from source database to BEDIT one
- Fixed deadlock with blocks with attribute after BEDIT
- Fixed selection of hatch pattern when ansi, iso or predefined tabs are opened
- Fixed custom hatch pattern not chosen when tab is opened
- Fixed crash trying to hide or show a non-existent toolbar from the command line
- Fixed hatch pattern dialog not memorizing custom as last used tab
- Fixed scrollbars in hatch pattern tabs
- Made hatch pattern automatically being picked when double-clicked
- Fixed crash using BEDIT without drawing tab
- Fixed display of isolines of a drawing coming from another cad
- Fixed QUIT/EXIT command to get parameters from lisp
- Fixed creation of block with NWUCS
- Fixed REFEDIT adding associated dimensions to blockset
- Changed default CROSSINGFRAMECOLOR and WINDOWFRAMECOLOR to white
- Fixed “_SETTINGS > Coordinate Input > Entity Selection > PICKADD” checkbox not taking 2 as a option
- Expanded special case for WORD/Excel OLE objects
- Fixed lisp strlen function on Korean OS with Korean strings
- Fixed associativity of dimensions using paperspace viewport
- Fixed window print selection adding a page setup from plot dialog
- Fixed JOIN of lines and arcs
- Fixed substitution of pfb font files
- Fixed exception during spline generation of isolines of a 3d solid
- Fixed crash during COPYCLIP command, reduced transformation matrix value from 1e+99 to maximum of 1e+16
- Fixed step/iges export with colors
- Fixed export of entity color in command ACISOUT
- Fixed STRETCH command which didn’t work on WIPEOUT
- Fixed open in read only mode to allow files to be saved by other cad
- Updated Insert Block Dialog: – Excluded “External References” as blocks. Fixed typo in Ribbon Manager
- Fixed display of text in block with frozen layer
- Fixed wrong message when the user doesn’t have the read/write permissions in allusersprofile
- Fixed program name in few string resources
- Crosshair follows the mouse pointer on grips even if ortho is active
- Fixed lisp strlen function on Korean OS with Korean strings
- Fixed priority of POLAR/ETRACK over standard esnap
- Fixed import of ARG files
- Fixed TRIM of XLINE with crossing option
- Fixed _STYLE dialog not closing pressing the ESC key
- Fixed crash with zoom extent in a specific drawing with HWACCELERATION=0
- Fixed various crashes with gripedit
- Fixed grip rotation according ANGBASE variable
- Fixed exception using polar in _DIST command in layout space
- Fixed crash using grip in some conditions
- Fixed crash at closing time after iges/step import
- Fixed crash updating status bar
- Fixed crash in Field command
- Fixed removal of layers in layers’ palette asking every time what to do with the entities on them. Now it’s possible to apply the chosen action to every selected layer
- Fixed layer count not refreshed when deleting a layer from the palette
- Fixed crash using explorer in some circumstances
- Improved speed of regen of solids reusing facets
Changelog version 20.0.4
- Changed default color of CROSSINGFRAMECOLOR and WINDOWFRAMECOLOR to white
- Fixed display of text in block with frozen layer
- Fixed crash activating/deactivation GRID in a viewport
- Enabled SNAPALLVIEWS variable to avoid crash using ESNAP+POLAR after change to layout, forced to 1 at start time
- Fixed PASTEBLOCK with NWUCS, fixed insertion point parameter after changes
- Fixed TRIM using edge of text and text
- Fixed MOVE of dimensions, fixed associated entity extracted from ESNAP
- Fixed Center option of CIRCLE command with dynamic input ON
- Fixed crash using PUBLISHKML with a peculiar file
- Fixed display of selected cutting edge entities after execution trim
- Fixed DAEOUT e PRINT3D e STLOUT commands
- Fixed crash deleting layers in explorer
- Fixed crash in “add vertex” item in hatch grip menu
- Fixed crash avoiding exception in dimstyle combo
- Added “RAL CLASSIC.acb”
- Changed Popup’s Type into [Yes/No/Cancel]
- Updated BCLOSE command in order to handle options from updated popup: – Yes: Save changes – No: Discard…
- Fixed exception in LWeight combo box
- Fixed crash changing active dimstyle
- Fixed crash getting area of hatch with malformed spline as boundary
- Fixed crash with hatch grip context menu
- Fixed crash related to DIMLAYER combobox
- Removed XREF dependent blocks from BEDIT list
- Fixed PASTEBLOCK command with attributes
- Fixed stretch of polyline’s arc segments on their own starting/ending grips creating a really huge arc
- Added ORTHO in PAN when shift is being pressed and orbit sphere is not triggered
- Added support for crypted color book acb files, Added new RAL and PANTONE acb files
- Fixed PICKADD variable seen as boolean and not as a tristate variable in _OPTIONS > selection tab
- Fixed dimension style in BEDIT session
- Fixed current styles in BEDIT session
- Fixed Keywords List of -COLOR
- Fixed _OPTIONS > Clipboard > “AutoCAD 2013 – AutoCAD 2017” check not working
- Fixed _COPY taking long time creating EMF and WMF files when zoomed in
- Added “Edit” command to Context Menu of Filters Tree in Layer Filter Properties
- Removed External Reference from Block list in Insert Block Dialog
- Removed External Reference from Block list in Block Dialog
Fixed crash opening a drawing with REVIT underlay - Fixed load of RCP files
- Added EXPBLOCKSCLOSE command in order to close Blocks Explorer Palettes
- Fixed TDINDWG variable
- Removed preview of point cloud in explorer to avoid hang
- Reduced GDI objects leaks in EATTEDIT dialog
- Reduced GDI objects leaks in Settings Dialog
- Reduced GDI objects leaks in 3D Tab in Settings Dialog
- Reduced GDI objects leaks in Entity Modification Tab in Settings Dialog
- Reduced GDI objects leaks in Entity Creation Tab in Settings Dialog
- Fixed height of mtext in property palette
- Fixed crash using QSELECT option in SELECT command
- Fixed position of cursor clicking in mtext editor
- Removed DGN option from _NEW command
- Fixed “Save Pc Info” button in _HWCONFIG dialog not working on windows 7 (removed quotes from output file name)
- Fixed import of MNU/MNU files that contains label with “**”
- Added ability to disable “automatic numbering” with variable
- MTEXTDETECTSPACE, Automatic Numbering now is enabled only with ‘1’ or ‘a’ or ‘A’
- Fixed display of folder name in open/save dialog
- Fixed number of isolines visible on some curved 3d solids in 2d wireframe
- Preselected images in IMAGE dialog to reflect active selectionset
- Fixed PREFIXSUFFIX command, added vl-load-com to enable vlax function used
- Reduced GDI objects leak in SETTINGS command’s Dialog: – Handled Property Sheet Icon Resource
- Aborted open transactions before save to fix problem of drawing “Saving_with_errors”
- Fixed save of drawing after cancel of DWGPROPS command
- Reduced GDI memory leaks in TABLEDIT command’s Dialog: – Handled Button Icons
- Reduced GDI memory leak in HATCH command’s dialog: – Improved Pattern Tab
- Fixed crash on selection of entities
- Fixed _REFEDIT preview dialog having strange Windows 7 alike style
- Fixed too long color combobox dropdown length in property palette
- Fixed _CENTERLINE > Extension > Amount option not taking enter without modifying the amount
- Added “Back” option in _CENTERLINE > Extension
- Removed memory leak in Tool Palettes when switching tab
- Fixed crash in _EATTEDIT command editing multiline attribute in the list
- Fixed QDIM ordinate function with NWUCS
- Removed memory leaks in Color Dialog
- Added outputfile parameter in pc info button in _HWCONFIG dialog
- Fixed “Save Pc Info” button in _HWCONFIG dialog not working on windows 7
- Fixed Isolate objects left click on status bar
- Fixed custom menus having different style in status bar
- Fixed Refedit with NWUCS
- Made long layer names fit inside the layer combo of property palette
- Improved prompt menu’s title dimension
- Added multicore configuration to HWCONFIG dialog
- Removed memory leaks of GDI Objects in Open/Save/New File Dialog
- Implemented MULTICORE -3 value to disable 1 core of cpu, added reactor to change it without closing the cad
- Fixed speed of creation of entity after autosave of drawing version 2013
- Fixed crash closing drawing after edit of associated dimension
- Fixed memory leaks in property palette
- Fixed use of dynamic blocks in toolpalettes
- Fixed selection of attribute to edit with double click, fixed NENTSELP and NENTSEL function
- Fixed multiline attribute edit, restored old dialog based interface instead of inplace editor
- Improved speed of draw of grips, added timeout to display grip menu (GRIPMENUTIMEOUT)
- Fixed insert of XREF in DXF file
- Fixed availability of various status bar panes
- Restored column features in MTEXT editor
- Fixed crash in hatch command
- Fixed exception using UNDO after REFSET add, it was caused by refedit preview dialog
- Fixed vla and vlax functions
- Fixed selection of text with MTEXTFIXED > 0
- Fixed esnap node in block with Point entity
- Improved Stability of Create Linetype Dialog
Major release version 20.0
- Improved Open and Save time
- The New CAD engine with improved features and stability based on Teigha Version 4.3.2 and IntelliCAD 9
Tool palettes for Blocks, Hatches and frequently used Commands. Use the tool palettes to organize blocks, hatches, and custom tools in a tabbed window. Easily customizable by Drag & Drop. Options and settings are accessible from shortcut menus. - The ready-to-use Palettes for: Draw, Modify, Annotations, Utilities, View, 3D Tools, Fills and Hatches, 2D Architectural, Electrical Diagrams, Electrical Plants, Mechanics ANSI-ISO, Mechanics DIN-ISO, Hydraulic-Fluids and Pneumatics, Steel Sections
- Improved visualization of texts and entities using Anti-Aliasing technology.
- Anti-aliasing is extremely important to making text smoother and easier to read.
- Further optimization for 4K displays
- Redesigned and rearranged menus
- New Blocks Palette for inserting and editing of internal Blocks with Drag & Drop support
- Property Panel Tree: the new selection control to view selected entities in a tree list allowing
Properties local editing ( highlighting/modifications based on the tree selection) - Double Click actions: customize the actions executed on DoubleClick to specific entities types
- Formulas in Tables
- Support for BIM file types: import/attach IFC and Autodesk® Revit® files (.rvt/.rfa,IFC). These file types contain building and construction data. Once the file is attached, you can explode it, snap to it, and use the RVTPANE command to open the Categories pane for visibility control
- AEC, Civil, GeoMaps, Mechanical objects support for visualization and properties editing
Improved support of PointCloud with ReCap (.rcp/.rcs) files - Print 3D Hidden with silhouette. Creation of clean 3D prints on curved solid parts printing in Hidden Visual Style
- Print with transparency on Hatches by using “Print Style Table” (CTB/STB) color configuration.
- Xref Notify: the control of updated or missing xrefs. AViCAD displays a baloon when an XREF (External Reference) linked to the active drawing is modified
- Digital signatures to .dwg files: a digital signature certifies the author of a file and indicates
whether the file has been altered since the digital signature was applied. - Recipients of drawings are provided with reliable information about the author of a drawing.
- Owners of drawings are provided with reliable verification that a drawing has not been modified
since it was digitally signed - Publish restyling: the redesigned user interface; new features in the print settings
- Custom Folders preset: adding of your most frequently used folders to the open/save dialog.
- Quick access to your disks/network
- Formulas in Tables: table cells can contain formulas that do calculations related to the values in
other table cells - SysVarMonitor: monitoring of a list of system variables with notifications sent when some variable
on the list is modified - Improved PDF export with more options available, such as making exported text searchable, the DPI setting for exported images and hatches, hyperlinks export, linearized .pdf files, and more
- Block Editor (_BEDIT). The Block Editor offers a special authoring area to enable free drawing and editing of blocks geometry
- Construction Line: a construction line is a special type of the infinite line that is typically used when quick drafting techniques are required. Similar to the infinite line, the construction line is a line through a given point, oriented at a specified angle in the three-dimensional space and extending to infinity in both directions
- MULTIPLOT: select title-block blocks or Polylines boundaries to print them sequentially using the boundaries as print windows
- ADDSELECTED: create a new object of the same type and general properties (Layer, Color, Linetype etc.) of a selected object, yet with different geometric values
- QUICKWBLOCK: create quickly an external DWG file from a selected group of elements
- CAMERA: define settings for 3D views of drawings according to a location and target. You can also specify the camera height, clipping boundaries for the view etc.
- ARRAYPATH: place object copies uniformly along a path or a portion of a path
- TABLEEXPORT: data export from a table object in the CSV file format
- POINTSEXPORT: Points export to ascii xyz or csv
- NEW EXPRESS TOOLS (Click for the Complete list of AViCAD Express Tools)
- CENTERLINE: create centerline geometry associated with selected lines and linear polyline segments
- SCALETEXT: enlarge or reduce selected text objects without changing their locations
- DIMREASSOCIATE: the association or reassociation of selected dimensions to entities or points on entities
- DIMREASSOC: restore the measured value to overridden or modified dimension text
- AREATEXT: calculate boundary area and place the text with the value in the center of the area. Through the configuration dialog the user can set: Units used for drawing, Units desired for measurement, Prefix, Suffix Units of measurement, Decimal number, Retain boundary. It is possible to select an area through multi points, the direct selection of entities or by clicking inside a closed area
- CHANGEBLOCK: create a new Bock Definition from a Block instance and open Block Editor to create a new modified Block
- RENAMEBLOCK: rename a block and add a new block definition for further editing
- CREATELINETYPE: create custom textual Linetypes through the Dialog box
- DIMPOLY: the automatic creation of dimensions around a polyline
- OFFSETSMART: create an offset deleting the original entities
- DIMARRANGE: the aligning of a dimension line and a sub line
- TEXTARRANGEV: arrange the selected text with vertical alignment
- TOTLENGTH: show the total length of selected object
- Table and TableEdits command improvements (margins and Cells format)
- .NET API updated and improved
Changelog version 19.0.10
- Fixed Refedit of XREF showing bad error message
- Fixed dynamic input with fractional units
- Fixed crashes
- Fixed wrong displayed scale and drawing units using positioning file in _IMAGEATTACH command
- Fixed insertion of images using a positioning file in _IMAGEATTACH command
- Fixed vl-cmdf lisp function
- Fixed DIMLINEAR issue with CUSTOM UCS
- Fixed crash at closing time after VBA AddRegion function
- Fixed stretch not working correctly with dyninput on and imperial units
- Fixed _DWFOUT command
- Fixed hatch not visible when drawing order is changed with _HATCHEDIT command
- Fixed publish to PDF with PDF printer: now it tries to restore current page size. If it’s not possible or a CUSTOM paper size is used, it avoids such page and displays an error
- Fixed crash occurring while creating an alias with empty name
- Fixed esnap on degenerated polyline with 0 lenght and with various overlapped vertex
- Fixed SINGLETON variable with double click, now SINGLETON variable is taken into account when double clicking on multiple dwg files
- Added a message in _SOLIDEDIT command
- Fixed import of localized PGP
- Fixed wrong polar tracking tooltip when ucs is not world
- Excluded file types with multiple extensions from File Find Dialog.
- Fixed ortho turned off after _DIMORDINATE command
- Added again automatic set of mtext’s width (if it was equal to 0) but added also a control to set back to 0 the mtext’s width if it was not edited
- Added some tooltips in IMAGEATTACH Dialog
- Fixed HANG editing MTEXT from property palette: avoid double entering in edit function that causes exceptions and wrong resource handle settings
- Avoided unhandled exception in property palette moving a MLEADER entity
- Fixed “invalid input” using _MATCHPROP on solid hatches
- Fixed leader’s last segment’s position changing with mtext justification
- Fixed not refreshing viewport when a layer inside was freezed or thawed
- Fixed “Initial_focus” DCL property, now it manages also text in editbox
- Added management of image’s drawing units inside _IMAGEATTACH dialog
- Fixed print of point clouds switching white from RGB color to color index 7
- Added alias for command PURGE
- Fixed wrong zoom after “_ZOOM > object” in paper space
- Fixed print window in specific drawing
- Fixed creation of hatches in drawings with architectural units with dynamic input. Now dynamic input angular text box accepts also other type of units
- Fixed _MATCHPROP not applying source hatches’ background color to destination hatches
- Fixed message box appearing for every selected entity when an invalid input was inserted in the property palette
- Fixed freeze/crash caused by INSERT’s dialog preview
- Handle Properties Group when using Enter to move from one property to the next one
- Added ToolTip String Resources for Refedit Preview Dialog
- Changed QSAVE behavior. Now QSAVE will always use Default Save Format
- Implemented ToolTips for buttons in Refedit Preview Dialog
- Fixed properties combos using SELECTIONPREVIEW : removed update of combo when cursor is hover entities with SELECTIONPREVIEW = 3
- Handled UNITS system variable in TableStyle
- improved CSV import procedure in Create Table Dialog
- In the Publish dialog, “Add Drawing” now handles .dxf files
- In the Publish dialog, a warning message is displayed before removing all sheets
- Minor UI tweaks in Publish dialog
- Improved speed of both raster image dialog and save command with many raster images located (or missing) on network path
- Fixed move of dimensions that modifies dimension entities
- Fixed ENTER on dcl dialog: Implemented “multi_edit_box” tile for multiline. Fixed “accept_value” attribute for “edit_box”
MARKERS command, removed bug in marking with text style with fixed height - Fixed plot dialog losing focus adding new page setup
- Fixed change of dimensions moving or copying: changed recompute algorithm to manage text outside of extension lines. Fixed vertical text in several conditions
- Fixed TTR circle that wasn’t working well when UCS is different from World
- Fixed creation of associative dimensions
- Fixed _DWFIN command not recognized
- Fixed wrong alignment in the preview of gradient hatch in _HATCHEDIT
- Added preview of transparency and layer switch during _HATCHEDIT
- Fixed not set of layer from _HATCHEDIT dialog
- Fixed not set of transparency from _HATCHEDIT dialog
- Changed column order in _LMAN (switched lock and freeze columns to be in the same order as in layer palette)
Changelog version 19.0.8
- Fixed QSelect command that changed current selection line type
- Fixed propagate of sheet settings taking settings from basic layout page setup, fixed concatenate of PDF
- Fixed redefine block from command line
- Fixed crash starting print preview with window and printwindowoptimization
- Fixed usage of “_OtherIcon” options in flyout and fixed GDI leaks
- Fixed bug in Print Dialog. Now “Number of Copies” will be restored correctly upon returning from Preview Window.
- Increased numeric values precision in order to fix a problem with options that use real values (i.e. Circle Radius)
- Fixed bug in Print Dialog when changing “Print Area” type with Page Setup set to <Previous plot>
- Fixed problem with “Add Selected Entity” in “Entity Selection Filter” dialog. Now, dialog will report all available options.
- Improved FLATSHOT performance and added progressbar
- Fixed crash pressing “DEL” button in some condition
- Fixed concatenate of PDF files in PUBLISH: changed to use printer concatenate function and disabled layer
- [G] Fixed “Plot to file” flag remain active after one plot to file
- Enabled multiple entities selection in case Classic Skype was found.
- Changed title of displayed dialogs. Enabled multiple entities selection.
- Improved entities selection in “Quick Select” Dialog.
- Fixed creation of circle, now it uses CELTSCALE instead of LTSCALE
- Added exceptions on double click on excel and word OLE objects
- Changed dialog type for “Explore Linetype” entry from Linetype Control in Ribbon.
- Improved numeric data management in Create Table Dialog
- Fixed forced plotstyle for single page in PUBLISH dialog
- Handled direct editing of “Linetype scale” and “Global linetype scale” in Linetype Manager Dialog
- Fixed TRIM of solid hatch
- Handled ENTER key on Layers List in Layers Dialog.
- Handled TAB and ENTER key in Property Palette.
- Fixed plot offset and plot style table in PUBLISH command using printer or PDF to our PDF printer
- Fixed PUBLISH with pdf printer, now it asks output filename printing on this printer
- Fixed rotation of paper using PUBLISH on printers
- Fixed GDI leaks loading external toolbars
- Improved speed of VBA selectionsets
- Changed behavior of “SENDTOSKYPE” command when new Skype version is installed.
- Fixed crash selecting objects after load of custom toolbars
- Fixed color of edges in hidden line mode in viewports
- Fixed print of images according IMAGEFRAME with PRINTWINDOWOPTIMIZATION on
- Fixed bug in Property Palette of OLE Object
- Fixed polyline width after _break command (also when the polyline’s widths are edited from the property palette)
- Added ALIASEDIT command
- Changed AREA command’s output when option ADD or SUBSTRACT is used
- Fixed scaling problem in EATTEDIT command’s dialog
- Fixed print window in assonometric view, removed print window optimization in such case
- Implemented multiple items selection in PURGE command’s dialog.
- Added LAYERSTATE alias for LMAN
- Fixed preview of POINTCLOUDATTACH dialog
- Fixed PRINTWINDOWOPTIMIZATION with frozen layers on XREF
- Changed column order in EXPLAYERS (switched lock and freeze columns to be in the same order as in layer palette)
- Managed MEASUREMENT variable in TABLE command dialog
- Fixed crash removing entities in REFEDIT session from two different drawings
- Improved LISP execution speed
- Fixed _PYRAMID command
- Fixed previous plot not setting the previous plot type
- Fixed imperial units always written as 0.0000″ (this happened when a measure had at least 1 foot but no inches [ex: 2′-0.0000″ -> 0.0000″])
- Added SHIFTMBTNROTATION variable to enable/disable the rotation using shift + middle mouse button
- Removed unused option in _EDGE command
- Fixed property dialog closing itself changing the property of a dwf/dgn underlay
- Made combo box in QSELECT dialog fit the longest name
- Fixed _SOLIDEDIT > Face > Taper not working with negative angles
- Fixed wrong area on polylines with intersected segments in _AREA command
- Fixed not working polar in ellipse command after insertion of second point
- Added ACTIVEVPORTBORDERCOLOR variable
- Fixed active viewport border color not restored after _VPMIN in model space
- Fixed status bar not refreshed switching between viewports in model space
- Fixed keyboard shortcuts seen in the toolbar tooltips
- Fixed wrong message in LAYISO command
- Fixed LAYOFF command ending if nothing is picked
- Fixed not seen cyrillic letters in the dropdown list of INSERT command’s combo box (changed font from “MS Sans Serif” to “Microsoft sans Serif”)
- Fixed _DIMOVERRIDE command not using DIMATFIT variable
- Fixed _DIMOVERRIDE command not using DIMTMOVE variable
- Fixed “append to current selection” option in _QSELECT command
- Fixed wrong dimension position property when ucs is not world
- Fixed not recognized korean characters in current named filter
- Fixed enable/disable of buttons in publish dialog
- Fixed commands defined in .NET language
- Added _POINTSEXPORT command to export points in xyz or csv files
- Moved some functions to different header file to simplify usage on non MFC projects
- Fixed registry path to autoload .NET dlls
- Added missing .NET examples file
- Added missing files to “Icad Managed Wrappers” project
- Fixed DWF PUBLISH also from multiple drawings
- Fixed prompt menu always changing position on right click
- Added check to avoid exception in property palette with wrong polyface objects
- Fixed ORTHO using command -PAN
- Fixed qsave command with DXF
- Allowed space in the “Edit dimension text” option (“Dimension” menu)
- Fixed PUBLISH of PDF using page setup using internal engine
- Fixed wrong behaviour in -PAN command when UCS is not World
- Fixed wrong behaviour in -PAN command when a distance is inserted instead of the second point
- Fixed rotation of plot in PUBLISH
- Enabled “Preview” button in Pagesetup dialog called from PUBLISH
- Fixed visualization on single line of read only variables
- Fixed wrong behaviour if not defined destination point in _-PAN command
- Fixed lag after pan and zoom in layout, removed regeneration after viewport change
- Fixed not working aliases of “dashed” commands on autocomplete on screen
- Fixed edit/new page setup to allow to use “Preview” and “specify window” button from page setup dialog
- Fixed not working input of snaps separated by the comma in _ESNAP command in not ENG languages
- Fixed wrong pdf underlay attachment (caused by wrong name truncation at first “.” instead of the last one)
- Enlarged toolbar text style and mleader combos and made them as big as the ribbon ones
- Enlarged toolbar dimstyle combo and made it as big as the ribbon one
- Enlarged toolbar layer combo and made it as big as the ribbon one
- Added question to save current sheet list in PUBLISH
- Set the maximum number for recent commands from 11 to 20
- Add “plot style” properties to PUBLISH dialog and fixed some refresh to update properties after some changes
- Changed page setup management in PUBLISH dialog, added “New page setup” and “Edit page setup”, changed PAGESETUP command to get object id to edit directly a plot style
- Fixed unhandled crash occurred in EATTEXT command when template file didn’t exist
- Added MODELUCSICONWHITE variable to manage if the usc icon should be white or take axis’ colors
- Fixed -PDFATTACH, -DWFATTACH, -DGNATTACH commands opening the file dialog even though they are “dashed” commands
- Removed force “Portrait”/”Landscape” functions from PUBLISH dialog, Removed “Page size” in PUBLISH options, Fixed priorities of options with PDF
- Added PAGE SETUP button to PUBLISH dialog
- Enabled multiselection for many operations in PUBLISH dialog
- Fixed lost of properties of viewports after zoom, fixed lost of visualStyleId of viewport object caused by recalcview
- Added “Plot Style” and “Page Setup” group boxes to publish dialog
- Added message on not erasable proxy
- Added buttons to PUBLISH dialog to replicate menu features
- Fixed crash occurred reading layer filters
- Added check to show “Email-activation” button in NLM monitor when the user try to activate tokens without internet connection
- Implemented page setup, properties of page in PUBLISH dialog
- Fixed _AIDIMFLIPARROW command not taking “Both” as default option when DYNINPUT is off
- Fixed crash occurred reading layer filters
- Fixed insertion point in BLOCK command with imperial units
- Changed design of text background color dialog to make it more clear and intuitive
- Added “Edit scale list” to viewport scale combo box which executes _SCALELISTEDIT command
- Fixed POLARMODE using EXTRUDE command aborting selection of path
- Added “Page Setup” menu item to publish context menu
- Added MODELUCSICONSCALE and PAPERUCSICONSCALE variables to manage ucs icon dimension respectively in model space and paper space
- Added saved page setup in PUBLISH menu
- Added load of linetype of rubberband if it’s not present in current drawing. Fixed load of SELCLT linetype from lin file according to MEASUREMENT variable
- Fixed duplicated elements in scale list modifying the annotation scale list
- Restored ARCTEXT command
- Fixed crash to plot or preview a corrupted file
- Sorted alphabetically “Standard Paper Sizes” list
- Fixed wrong suggested scale value in _SCALE command
- Changed design of point cloud color map dialog (removed tabs)
- Fixed DWGPROPS command not recognized
- Fixed visualization of inverted XCLIP blocks
- Fixed inverted XCLIP filter creation
- Fixed entities remaining highlighted after zoom or pan when SELECTIONPREVIEW variable was set to 1 or 3
- Fixed double click on dynamic block not executing _REFEDIT command
- Removed regen after dynamic block grip edit
- Fixed edit of aliases, set modified flag to avoid double check changing focus between property values
- Fixed set of multi line style
- Fixed explode of block during REFEDIT
- Fixed not saved DCTMAIN and DCTCUST variables in _SPELL > change Dictionaries…
- Fixed DCTMAIN variable not saved in OPTIONS > file/path (saved only the file name and not the whole path)
- Disabled by default SNAPALLVIEWS variable (to draw esnaps only on active viewport)
- Fixed impossibility to draw caused by snaps outside the viewport in this case
- Fixed drawing of helixes on all the views (it worked only on top view)
- Fixed wrong message editing an XREF with REFEDIT
- Fixed pcad.chm not found clicking on help button in “Add Print Style Table” Dialog
- Fixed edit of aliases
- Fixed DIMLINEAR with esnap on objects in viewport
- Fixed load of icons from an external DLL
- Fixed mleader’s properties not seen in property palette
- Fixed change of color of layer: fixed icon of color changed on click
- Fixed impossible to hide some options from status bar such as dyninput, dynucs and isolte objs
- Added MULTIMONITORPALETTE variable which when enabled allows the saving of the palettes on secondary monitors
- Fixed wrong message and management of PICKADD variable in OPTIONS > Selection tab
- Fixed grip and edit of XCLIPPED blocks
- Fixed hand cursor staying visible and link not changing color when hovered in about dialog (due to last commit)
- Added editing of User Name inside about dialog when an nlm server is used
- Fixed not refreshing of property dialog
- Fixed ucs icon not hooked as before (after color scheme restore)
- Fixed TRIM of specific drawing. Fixed exception in geometric library that creates composite curve with degenerate segments from ortho projection
- Added message using REFEDIT on dynamic block
- Fixed FLATSHOT to create spline curve from too angled segments
- Fixed previous selection remaining on the screen when switching between viewports (also when you exit from a viewport via double click)
- Added expression evaluator in distance input (Eg: radius of circle)
- Fixed substitutes of TTF fonts using pcad.fmp
- Removed useless message about substituting font with same name
- Fixed previous selection remaining on the screen when switching between viewports (also in layout space)
- Enabled selection area only on active viewport and not for all
- Fixed -PLOT command to set plot window area with TARGET variable different from 0,0,0
- Added grip menu on hatches defined by edges
- Fixed failing return of VlaEnameToObject function
- Added management of LAYOUTCREATEVIEWPORT and MAXACTVP system variables in OPTIONS > Printing tab
- Fixed double click to edit table on active layout
Major release version 19.0
Performance
- Improved entity snap performance in drawings with underlays
- Improved redraw performance when creating and updating entities in a drawing that has a large number of existing entities
- Improved performance in drawings with XREFS
- Improved startup time
- The New engine for 3D PDF conversion
- Improved performance printing large drawings in the model space with windowed print area selection
- User Interface
- Optimization for 4K displays
- Redesigned and rearranged menus
- New CUI Editor for easier customization of the User Interface
- Edit or Import/Export of Menu, Toolbars, Ribbons, Application Buttons, keyboard shortcuts and aliases from .cui files
- Import/Export of aliases from .pgp files
- Spaces optimization in the Ribbon menu to improve readability
- Viewport Controls provides a convenient way of changing views and visual styles
- The New Insert blocks dialog with preview
- Pointer colors. The pointer color management allows to assign different colors for the pointer in 2D and 3D views
New Commands
- SLOPE is a tool for creating slope patterns between a set of corridor lines/curves or to convert Polylines into Slope style Polylines
- BetterWMF Integration solves the problems related to copying and pasting drawings into other software packages like Microsoft Word
- Plot Margin Customization – Editing standard paper size margins of plotters/printers. Print over the standard devices margins and cover the entire sheet area
- Numbered Markers (Bubbles) automatically creates bubbles with sequential numbers or letters
- Sort Data Extraction – Changing the sort order of tables generated by attribute extraction based on Columns
- Total Lenght Measure – Calculation of the total length of selected Entities
- AIDIMFLIPARROW flips the direction of arrowheads on Dimensions
PointCloud – Color Map – Set color scheme for imported PointClouds (not confirmed yet)
- New SENDTOSKYPE command allows to send a .dwg file with selected entities via Skype
- Copy&Paste. Now you can copy and paste selected entities as an image in some Chat apps
- Advanced Copy&Paste adds an option to enable Copy&Paste of selected entities as CAD data into other applications like Explorer or Chat apps (Telegram etc.). Fast transfer via Chat of a dwg file that contains only your selection
- IFC support (Underlays) – The IFC (Industry Foundation Classes) format files include building and construction data
- IFCPANE command to open a Categories panel to control visibility
Once the .ifc underlay is attached, it is possible to explode it into normal entities
New Import File Types Include:
- 3D Studio file .3DS
- LightWave file .LWO
- Wavefront file .OBJ
- STereo Lithography file .STL
- Maya file .RGT
- Google Earth file .KMZ
- Virtual Reality Modeling Language file .VRML
- Pointcloud .LAS (as CAD points)
- Pointcloud .XYZ (as CAD points)
- Improved ESRI Shape (.shp) import. Base Elevation (initial Z value) can be set
New Export File Type Include:
- Wavefront file .OBJ
- Maya file .MA
Express Tools
- GETSEL creates a selection set of objects based on layer and object type filters
- BSCALE scales a block reference relative to its insertion point
- GATTE replaces all values with the same attribute tag name in all selected blocks
- QLATTACH attaches a leader line to an mtext, tolerance, or block reference object
- DIMDISASSOCIATE removes associativity from selected dimensions
- PREFIXSUFFIX adds Prefix or Suffix to selected Texts
Various Improvements
- Visualization of previous print area (the Area of drawing used during previous print will be highlighted)
- The interface for External References management (DWG, DGN, DWF, PDF, PointClouds, Images)
- The in-place Multiline Text editor now fully supports line spacing, lists, and paragraph justification
- The New Filter option for the -LAYER command
- Search for files when using the Open command by clicking Tools > Find
- Publish – Export using PDF Printer and improved GUI
- HATCHTOBACK command sets the draw order with all hatches moved behind other entities
More features available in the Quick Access Toolbar
- AutoComplete – Smart Search and Improved readability
New or Updated Commands
- BLIPSIZE, IFCOSNAP, MLEADERSCALE, SELECTSIMILARMODE, SNAPSIZE, UOSNAP DTEXTED, GFANG, GFCLR1, GFCLR2, GFCLRLUM, GFCLRSTATE, GFNAME, GFSHIFT, MDISTYLE, MTEXTED, TEXTED, TEXTEDITMODE, XCLIPFRAME
Changelog version 18.0.10
- Fixed not added new text style when created from table style editor
- Fixed not working annotative checkbox on new dimension style
- Fixed selection when cursor tries to select before text (MTEXT Editor)
- Fixed selection of last char in dimension text or other middle aligned mtext (MTEXT Editor)
- Removed chance to set width, height, length and scale of pointcloud entities to less or equal to 0
- Added “proceed” option in text mask command
- Fixed save path when path is over 90 chars
- Fixed freeze when zooming in OLE image
- Fixed table with exceeding column at the end (importing csv file or using eattext command)
- Fixed wrong display for some stairs when in meters (EasyArch3D)
- Fixed layouts order in publish command (now it’s not ordered alphabetically)
- Fixed command line version of mapimport command to avoid file selection dialog
- Fixed editing of layer state name
- Fixed display of Chinese text
- Increased HATCH definition from 72 DPI to 600 DPI in EXPORT command
- Increased HATCH definition from 72 DPI to 600 DPI in PUBLISH command
- Fixed wrong scale switching from mm to inches in ADDFORM command
- Fixed FIND with previous selection and blocks
- Fixed automatically assigned ByBlock color instead of ByLayer in PLANE and SOLID commands
- Fixed toolbar/ribbon not updated when SELECTIONPREVIEW system variable is 1
- Fixed JOIN command in several conditions
- Fixed refresh of table preview when changing the table style
- Added editing of arctexts with the double click
- Fixed load of localized commands from .NET dll
- Fixed AREA and TRIM of hatches in some condition
- Fixed wrong conversion between millimeters and inches in ADDFORMS command
- Implemented selection of entities for WMFOUT command
- Fixed transparent background for EMF and WMF according to WMFBKGCOLOR variable, increased resolution up to 10x to improve curved entities
- Fixed bad value order into “AREA” command results
- Fixed missing image drawing units in the image details (before the insertion of the image)
- Added checkbox for ZOOMWHEEL system variable in OPTIONS > CROSSHAIRS
- Fixed “DWG Wizard” not displayed on _NEW command when STARTUP variable is ON
- Fixed issue that was causing the lost of the selection before _QDIM command
- Added “Don’t show anymore” checkbox in the message that appears when print configuration is not found and replaced with the default one
- Fixed reset option in _-SCALELISTEDIT command
- Fixed wrong setting of image scale from property dialog
- Changed the minimum dimension of paper margins in ADDFORM from 0 to 6mm (which is the tolerance applied later)
- Fixed the reset of arctext color when the edit dialog was opened
- Fixed not enabling rename, delete and modify buttons in “Multiline Style” dialog
- Fixed table border color applied only to table’s last grid line and not to every cell
- Fixed some issue moving palettes in multi monitor configurations
- Fixed problem editing values in DIMSTYLE dialog when LUPREC system variable is set to 0
- Fixed not working single line quote when upper and lower deviation tolerances are equal. Enabled “Display print styles” by default in print dialog
- Added a message that alerts the user that by removing all DWG checks copyFrom/paste function may not work
- Fixed duplication of the grid and duplicated count of “All(X)” items in property dialog
Changelog version 18.0.8
- Fixed Windows 10 FALL CREATORS update performance problems
- Fixed quality of transparent icons
- Fixed bad UI for custom control with high DPI
- Added DPI Aware settings in options dialog
- Fixed drag of blocks on x86 version with DRAGDETAIL > 0
- Added check to avoid crash while closing, when IRX applications uses point monitoring
- Added Layer support in PUBLISH PDF
- Added detection and correction of possible PDF/JPG printers activation issues after OS update
- Fixed crash when TABLE command is called multiple times
- Changed the file name of the ones saved during emergency save when crash occurred
- Added opening of .SV$ files during drawing recovery
- Fixed height of command list items in 4k high dpi monitor
- Fixed height of items in layer toolbar combobox in 4k high dpi monitor
- Fixed height of items in toolbar combobox in 4k high dpi monitor
- Fixed crash using dynamic block grips
Changelog version 18.0.6
- Added zero margins prints
- Implemented Object properties evaluation, now it’s possible to create FIELDs compatible with AutoCAD and evaluate properties
- Implemented MLEADER,MLEADEREDIT, MLEADERALIGN, MLEADERCOLLECT commands
- Fixed Display grips of clipped block references with XCLIPFRAME variable off
- Fixed preview during drag of XREF
- Fixed Block wrong move after REFEDIT
- Fixed DIST command issue with rotated UCS
- Implemented hatch stretch and grip edit for hatches created selecting entities
- Fixed display of XREF after a cancel of REFEDIT command
- Fixed QSELECT dialog in some drawings
- Fixed TRIM with SHIFT and EXTEND with ENTER
- Fixed freeze selecting polylines and hatches, new method to calculate area of a polyline
- Fixed crash trimming HATCH
- Removed “Reset” button in customize dialog
- Fixed display of entities on locked layers
- Fixed select of ESNAP from SHIFT+RCLICK menu using keyboard shortcut
- Fixed selection of items in option list of dynamic input
- Fixed REFEDIT > DISCARD some blocks are deleted
- Fixed Text entering is under images
- Fixed join of collinear segments
- Fixed insert of XREF without path
- Fixed undo of changes to 3D solid properties from palette
- Fixed dimstyle and textstyle combo in toolbar and in property palette
- Fixed crash while closing with multiple drawing
- Fixed error when breaking walls on EasyArch
- Fixed DIMLINEAR – “Invalid input” when trying to insert Mtext/Text after DIMLINEAR->Horizontal and DIMLINEAR->Vertical by passing the correct state parameters
- Fixed exception using dynamic block grips and fixed restore of ORTHOMODE using grips
- Fixed exception in REFCLOSE command makes impossible to continue to work
- Fixed lag and slowdown creating objects, with selection window and other operations when some other process uses CPU heavily ( > 90%)
- Restored FILEDIALOGS variable to control choose file dialog with every file extension
- Fixed exception with REFEDIT on block containing dynamic block
- Fixed import button in SCALELISTEDIT dialog called from status bar
- Fixed autocomplete dialog layout
- Fixed drag of blocks with dragdetail > 0
- Fixed drag of objects during MOVE,COPY, SCALE, etc … with great coordinates
- Fixed evaluation of field “ObjectName”
- Fixed crash opening drawing with fields
- Fixed height of toolbar using “classic” UI on 4k monitors
- Fixed size of icons in layer palette with 4k display
- Fixed size of layer Icons with 4k monitor
- Fixed locked layer selection in commands (MOVE, COPY, etc) after changes to TRIM on block
- Fixed FILLET between XLINE
- Fixed crash at close time
- Fixed selection of clipped viewport with its polyline
- Fixed selection of viewport in layout
- Disabled QLEader attachment options when “Underlay” is checked
- Fixed trim of circle or arc with rectangle as boundary
- Fixed TRIM and EXTEND with blocks selecting with window
- Fixed area of hatches with simple island
- Fixed Czech capital letters in command line
- Fixed lag after edit commands (eg: DELETE, TRIM)
- Avoid crash when superhatch cannot detect intersections in boundary detection
- Removed XREF dependent layer from DIMLAYER combo in dimstyle dialog and in ribbon/toolbar
- Filtered XREF dependent layer in layer combo in HATCH dialog
- Removed background white rectangle from print
- Fixed area in properties and list for polyline and 2dPolyline objects
- Improved performance of copy large amount of objects
- Fixed a crash when insert a door/window with no wall (using EasyArch)
- Fixed selection with PREVIOUS option
- Fixed selection of source object in MATCHPROP command
- Fixed HATCH area calculation using region method
- Fixed performance of DIMSTYLE dialog with many Dimension styles in quite large drawing
- Implemented selection of entities on locked layer
- Resized linetype, lineweight and color ribbon combobox
- Improved performance of REFCLOSE with refedit preview
- Added symbol menu in context menu for single line text edit
- Fixed cone radius, height and center z into property palette
- Hidden some fields from list in “FIELD” dialog
- Fixed crash opening drawing with clipped XREF
- Fixed slow selection in drawing with clipped xref
- Fixed selection of block reference with window selection mode
- Fixed crash saving modify to a xref using REFEDIT
- Fixed visualization of faded objects (placed on locked layer, XREF or during refedit), on some drawings such entities disappear
- Fixed text not aligned in the middle in QLEADER command
- Fixed MTEXT option that didn’t start the MTEXT command in QLEADER command
- Added Rename and Delete buttons in WSSETTINGS dialog to rename and delete workspaces
- Changed default value of “Path options” in “Modify Transmittal Setup” dialog, now by default all files are placed in one folder and not organized in a folder structure
Major release version 18.0
- New In-place Text Editing
- Easy Viewport editing using VPMAX
- Updated GUI, Toolbars and Workspaces
- Superhatch – using blocks, images and more
- Default Layers for Dimensions and Hatch Patterns
- Added Isolate and Hide entities tool
- Fade control for XREF’s and locked layers
- Cloud import file types available
- Import and export various file types
- Import ESRI Shape files (.shp)
Changelog version 17.0.10
- Changed order of initialization of graphics device to fix problem with NVIDIA QUADRO Graphics card
- Fixed POLAR/ETRACK without first point and ETRACK from another point
- Fixed some minor issues with EasyArch
- Fixed stretch of hatch with arc edge
- Added curved door Right hinge
- Fixed display of cursor after mouse wheel zoom during layer combo edit
- Fixed crash using “Convert to arc” from hatch grip menu
- Fixed crash with “Reassociate boundary” grip menu
- Fixed crashes from crashreports
- Improved reactivity of commands with dynamic input ON
- Removed update of property palette during command on ViewChange event
- Fixed typo in entity property
- Fixed open of drawing with bad spline
- Added PICKFIRST variable to SYSVARMONITOR by default
- Improved speed to start commands
- Added SYSVARMONITOR command to monitor FILEDIA variable changes
- Fixed release of IRX commands after use to fix destructor calls
- Fixed icGetVarType and icFindSysVar IRX functions
- Fixed hatch stretch and grip exceptions
- Fixed crash adding a new vertex to hatch with grip menu
- Fixed open of specific drawing
- Fixed hang in print preview with specific drawing
- Changed background color of toolbar customize dialog
- Fixed Text with lineweight that had a bad color boundary
- Fixed crash editing hatches using grip
- Fixed variable LOCALROOTPREFIX and ROAMABLEROOTPREFIX
- Improved POLAR with different ESNAP active, Improved ETRACK point detect and detach
- Fixed CHAMFER with polylines, now it’s created a unique polyline if one of selected entities is a polyline
- Fixed performance of stretch command with hatches
- Mech-Q Ducting Accessories : Cushion Head Boxes Added
- Mech-Q Ducting Accessories : Bellmouth Spigots – with & without Dampers Added
- Mech-Q Ducting – several bug fixes and several minor improvements
- Mech-Q Piping – several minor improvements & bug fixes
- Piping BOM lengths when Weld Gap is used – Length correction
- Piping Flanges – added Weld Gap option
- Piping PVC and and PVC-DVW several minor improvements
- Structural – Channels profile error fixed
- Structural – several minor improvements
Changelog version 17.0.6
- Improved command hint list reactivity, added performance counter in command list filter procedure
- Improved performance of SOLPROF/FLATSHOT command to create spline on elliptical arcs
- Fixed FLATSHOT and SOLPROF to generate complete projections and create arcs and circles (not elliptical)
- Fixed usage of custom paper size such with HP 500 plotters
- Added Print transparency check to page setup dialog and changed data store to drawing in page setup xdata
- Implemented delete of layers in layer palette
- Reworkerd crash report dialog with special crash events (NVIDIA, AMD, INTEL driver crash and “Dell recovery and backup” software)
- Implemented WMFBKGND for export using EMF format
- Fixed error using PC3 referring to an unavailable plotter
- Improved OVERKILL to create a circle from overlapping arcs
- Fixed OVERKILL performance
- Improved OVERKILL to delete completly overlapped polylines
- Fixed regen of blocks after layer thaw
- Fixed deadlock in property palette refresh switching layout
- Implemented dynamic UCS on Surfaces
- Fixed SWEEP command in surface mode with closed object
- Fixed direction of extrusion of BOX command
- Changed “read-only” message to System modal
- Removed ESNAP, DYNUCS and SNAP during dragging of entities
- Enlarged buttons in customize dialog
- Fixed set of FONTALT variable for eastern asian languages
- Fixed -ARRAY command with localized default options
- Added alias “CO” for COPY
- Fixed preview of create table dialog
- Fixed hide of ANNOALLSCALE and ANNOALLVISIBLE status bar panes
- Fixed resize of LAYWALK dialog
- Fixed crash grid zooming out to infinite
- added resource to translate Region entity name in QSELECT dialog
- Fixed COPYTOLAYER to show layer dcl
- Fixed second level flyout size
- Fixed crash setting transparency to plot
- Fixed erase of layer DEFPOINTS from layer palette
- Fixed localization of some messages in BOUNDARY command
- Fixed button to choose block destination in FLATSHOT command
- Fixed SECTION command in NWUCS
- Implemented nested flyout icon replacement, pcad uses first button icon of first nested flyout
- Fixed brkline.dwg to avoid warning message in BREAKLINE command
- Fixed elliptical cone option
- AUDIT command deletes 3D solids
- Implemented SECTION command on surface entities
- Fixed DWGTITLED, DWGPREFIX and last used path after vba SAVEAS
- Fixed Circle 3P option with esnap TAN+TAN+point
- Implemented WMFBKGND variable to control background color of WMF
- Removed question on OPEN command reopening a currently opened drawing
- Fixed position of some controls in layer walk dialog
- Removed “Protect password” checkbox from save dialog
- Fixed HATCH boundary in a drawing
- Fixed TCASE with multiline MTEXT entity
- Changed double click action on MText to start DDEDIT instead of MTEDIT
- Fixed crash using TEXTMASK with solid mask
- Fixed rename ribbon tab title.
- Fixed crash in layer palette
- Fixed x64 issues in layer palette
- IRX C++ Implemented icedRegisterOnIdleWinMsg, icedRemoveOnIdleWinMsg API
- VBA:
- Fixed export command called from vba
- Fixed PrintPreview method of Document object in VBA, now it takes current layout settings
- Restored StartUp VBA event
- Improved speed of vba Divide method
- Fixed Explode method of ActiveX 3dPolyline and Region
- LISP:
- Fixed lisp fill_image with negative colors and DCL aspect_ratio attribute
- Fixed COPY command called from lisp or script to ignore multiple mode
- Implemented vla-IntersectWith
- Implemented vlax-3d-point lisp function
- Implemented VLAX functions for 3d Polylines and LW Polylines
See other features
Changelog version 16.0.10.24
- Updated ALL Amyuni driver files to 5.0.1.9
- Fixed print and preview of images
- Disabled resize of edit dimension style dialog.
- Fixed LISP vlax-ename->vla-object and (vla-get-activedocument (vlax-get-acad-object))
- Fixed FROM esnap with NWUCS
- Fixed “Autor” in dwgprops command
- Fixed a probably NLM thread gosthing with Windows 10
- Fixed creation of spline from VBA
- Fixed elevation of hatches in NWUCS
- Fixed stack/unstack selecting last characters in mtext editor
- Fixed entity type used by vba for ExternalReference and added Path property to Block object
- Fixed update of dimensions changing scale factor
- Fixed HATCH command selecting 2D polyline as boundary
- Fixed MTEXT dialog context menu to enable Stack/Unstack menu item also with ~ # ^
- Fixed VBA IsXref function
- Fixed edit of hatch with USER defined style
- Changed HPANNOTATIVE default value to 0
- Added set of FONTALT variable with Far East languages
- Fixed print with TTC fonts (like mingliu.ttc)
- Fixed command DIST in layout if don’t pick point by esnap
- Updated OneDrive detection
- Fixed use of right click and osnap PER/TAN when dynamic input is active
- Fixed FROM with dynamic Input
- Added Autocad LT and ProA clipboard formats
- Implemented “Embed TTF” and “TTF text as geometry” in PUBLISH
- Fixed first time use of ETRANSMIT
- Fixed display of additional file in etransmit dialog
- Changed “Insert” to “Block Reference” in QSelect dialog
See other features
Changelog version 16.0.8
- Fixed POLAR on ROTATE command after reference option
- Fixed problem with redrawing
- Fixed ESNAP on ACIS objects in blocks
- Fixed crash with esnap on ACIS
- Fixed UNDO after SHIFT to enable ortho
- Fixed crash that may occur saving state of toolbars while closing AViCAD
- Fixed bug reading PRG files
- Fixed -HATCH with NWUCS
- Fixed input linker option for QSelect project
- Fixed dynamic block name and added length filter for some entities
- Improved some specific commands during multiple lisp command
- Improved speed of multiple lisp command with dynamic input ON
- Fixed AREA command with architectural units (exchanged inches with feet)
- Fixed Area prompt for architectural units
- Fixed enable/disable of menu using variable
- Added layer state to layer combo
- Updated a few EasyArch objects to fix some measurement errors
- Fixed update of layer dialog when is opened but collapsed
- Fixed IcEditorReactor to send lispEnded on top level lisp command
- Removed message on DIMENSION command during LISP or SCRIPT
- PDF 3D: Tuned tessellation to 25 instead of 0, to reduce the PDF size
- Removed message on JOIN command during LISP or SCRIPT
- Disabled property palette and layer palette refresh during lisp or command to increase speed of LISP execution
- Fixed crash during layer list reload operation
- Dynamic Input: Improved speed of lisp procedures with many commands
- Removed message on LINETYPE command during LISP or SCRIPT
- Fixed clear of excessive layer filter, improved filter load, avoided load of layer data when layer palette is closed
- Fixed Unload of raster images to unlock file
- Fixed load of ACIS from other cad drawing
- Fixed EXPORTPDF to show only PDF format in file dialog
- Dynamic Input: Fixed EXPORT options and prompt string
- Added check in layer palette and variable USELAYERFILTER to enable/disable layer filter in layer combo box
- Added set of current FILTER in layer dialog
- Added FILTER to layer combo
- Fixed SWEEP command sent using lisp and selecting entities using lisp variable
- Added 3dFace to SOLPROF
- Fixed surface in FLATSHOT/SOLPROF
- Fixed crash closing AViCAD
- Dynamic Input: Added check to avoid prompt window in script or lisp
- Fixed SWEEP after UNDO
- Fixed POLAR with DynamicInput and NWUCS
- Fixed imperial units distance that contains spaces (eg: 15/2″ -> 0′-7 1/2″)
- Added dialog to FLATSHOT
- Fixed lost of width of columns in layer dialog changing document or active space. Added save and load of columns width between sessions
- Improved load of extruded ACIS (fixed only if they come from AViCAD)
- Improved command hint manager for not existent commands
- Fixed ROTATE3D X/Y/Z options in NWUCS
- Fixed command hint edit to starts a command quickly. Added AUTOCOMPLETEDELAY variable to change delay of list showdown
- Fixed WEDGE length option in NWUCS
- Fixed BOX with negative length width and height
- Fixed MIRROR3D in NWUCS
- Added support of some visual styles to property palette
- Implemented SHADEDGE variable drawing ACIS in Shaded mode
- Fixed SHADE and HIDE command to set also correct visual style
- Fixed ZOOM extent with only one point entity in drawing
- Fixed mirror of hatches
- Fixed creation of layer group filters
- Added context menu to DYNUCS status bar pane
See other features
Changelog version 16.0.6.7
- Fixed COPYCLIP between AViCAD and other softwares
- Fixed EXTRUDE of not closed polylines but with equal end and start points
- Dynamic Input: Fixed SPACEBAR to change grip function
- Layer Manager: Fixed creation of layer group filters
- Removed wrong ortho glyph used with ETRACK on NWUCS
- Dynamic Input:Fixed not allowed chars
- Annotative Dimension: Added regeneration of annotative dimensions to avoid disappear
- Fixed BOX command starting from not 0 Z
- Fixed update of angle with rotation in Z axis in VIEWCTL dialog
- Fixed ROTATE3D X/Y/Z options in NWUCS
- Fixed CONE/CYLINDER specify radius with Z point
- Fixed creation of BOX by length in NWUCS
- Fixed command WEDGE length option
- Dynamic UCS: Fixed exception in some cases
- Disabled OSMODE for command LOFT
- Annotative blocks: Fixed assign of annotative scale after SAVE and re-OPEN
- Annotative blocks: Added BLOCKSCACHE variable to disable cache of blocks
- Annotative blocks: Fixed BLOCKSCACHE change removing automatic reload of current drawing to avoid hang
- Annotative blocks: Added check to annotative blocks changing active annotative scale, if found pcad asks to user to disable blocks cache and reload drawing
- Added check to avoid useless and slow set of pdf printer margin
- Fixed JPEG printer
- Fixed LOFT command. Now it accepts parameters from LISP
- Fixed crash/exception saving (also autosave) drawing with thumbnail
- Fixed save of last used path to allow to set it by external IRX
- Fixed lisp PRINT and PRIN1 with “\\”
- Fixed FILLET command of a closed polyline
- Fixed FLATSHOT and implemented dragging of created blocks
- Fixed error when autosave a 2013 drawing
- Dynamic Input: Fixed CONE, SPHERE, CYLINDER commands typing diameter instead of radius
- Added new contextual menu items for viewports. “Viewport Clip”, “Display Viewport Objects” and “Display Locked”.
- Command VPORTS : Fixed ON/OFF for option Lock
- Fixed ESNAP on ACIS with NWUCS
- Dynamic UCS: Added dynamic UCS to CONE command and direction of extrusion
- Dynamic UCS: Added Dynamic Ucs to WEDGE command
- Dynamic Input: Fixed NNx and NNxp annotation in ZOOM command
- Fixed extrude command with mouse direction and esnap
- Fixed a wrong option in the ucs menu
- TBSIZE variable set to readonly
- QLEADER position error (with modified ucs)
- Fixed specify of height of CILYNDER depending from mouse direction, ESNAP or ORTHO 3d
- Fixed specify of height of BOX depending from mouse direction, ESNAP or ORTHO 3d
- Dynamic UCS: Fixed Cylinder command with dynamic UCS
- Changed the saving version parameter for command line
- Fixed freeze with files with OLE objects
- Removed colon at the end of EasyArch object’s attributes in the edit object mask
- Cloud: Fixed save to cloud without fonts
- Fixed INSERT command setting angle with keyboard and POLAR
- Fixed Missing Arc Aligned Text label in QSelect
- Fixed ROTATE command setting angle with keyboard and POLAR
- Added some check to avoid exception in NCOPY
- Fixed DWGPREFIX and DWGNAME variable for files in 2013 format
- Dynamic Input: Fixed dimension pointed lines scale in imperial/metrics drawing
- Dynamic Input: Fixed height of text in dynamic dimension in drawing if current text style has fixed height
- Dynamic Input: Fixed FLATTEN prompt for options
- Dynamic Input: Moved dynamic controls away from cursor position
- Dynamic Input: Fixed prompt text of command TEXTMASK and MOCORO and various messages in express
- Dynamic Input: Fixed display of unselected text in dynamic control
- Dynamic Input: Fixed draw of caret in active edit control
- Fixed Hatch of dynamic blocks
- Fixed BREAKLINE command in NWUCS
- Dynamic Input: Fixed PAN and ZOOM during selection in localized version
- Dynamic Input: Fixed cursor on mandatory option list after select (PEDIT, IMAGECLIP,…)
- Removed grips from solid face perpendicular to view direction
- Fixed position of tooltip of ESNAP/ETRACK/POLAR
- Dynamic Input: Fixed RAY and XLINE input
- Dynamic Input: Fixed reset of value in GetString mode
- Dynamic UCS: Fixed dynamic UCS during RTPAN/RTZOOM
- Fixed the “File” menu when closed all documents
- Dynamic Input: Fixed display of dynamic input controls after RTPAN in REVCLOUD command
- Dynamic Input: Fixed display of selection set coordinate controls after RTPAN
- Dynamic Input: Fixed options in RASTER commands
- Dynamic Input: Fixed update of controls and dimensions using only keyboard
See other features
Changelog version 16.0
- AutoCAD® 2016 compatible
- New Annotative Objects
- New Dynamic Input
- Dynamic Blocks Editing
- Added Cloud Support
- Stretch and pull 3D solids
- New Annotative Objects
See other features
Changelog version 14.0.10.15
- Fixed: MTEXT format gets corrupted after editing
- Fixed: Ortho is not working when select an entity
- Fixed: Extrude error – Wrong EXTRUSION by path
- Fixed: sds_getpoint is not showing message for invalid input
- Fixed: MENU path is not deleted from search paths
- Fixed: Paper size is reset when printer is not found
- Fixed: Crash during switching layouts
- Fixed: FILLET creates bad fillet when FILLETRAD is greater than possible arc’s radius
- Fixed: No preview while creating a spline
- Fixed: FLATTEN command missing output
- Fixed: Crash on exit after some operations with Drawing Explorer
- Fixed print and preview of “\U+XXXX” unicode texts
- Fixed DIMORDINATE with INTERSECTION snap
- Fixed ARTGR + E for Euro symbol in mtext dialog
- Fixed etrack with additional angle setting
- Fixed check of large double number
- Fixed problem saving in R13 version
- Added color button to snap aperture panel
- Added button to open explorer in printer styles window
- Disabled ESNAP with SNAPGRIDLEGACY set to ON without active command
- Fixed DELOBJ variable with SWEEP command
- Fixed sweep object after regen
- Fixed crash with esnap on ACIS
- Fixed REVOLVE command to remove selected objects (path and revolved objects)
- Fixed DIST in PSPACE viewport clicking on polyline
- Fixed eattext dialog with languages different from eng
- Fixed exception moving sphere with grip with SOLIDGRIPS ON
- Fixed GRIP with NWUCS
- Fixed right click and ENTER to terminate grip edit
- Added CTRL to copy entity using grip
- Added multiline mode
- Fixed HATCH dialog, now it reloads custom and user defined patterns
- Selected by default the default Profile
- Disabled export button for default profile
- Fixed load of pc3 settings, use paper size from dialog and B/W vs color
- Fixed drawing open with nested xref
- Fixed: When dragging line/polyline vertices by grips, elevation is reset to current ELEVATION value
- Fixed: Toolbars rearranged wrong when there are empty spaces between them
- Fixed print unexpected error: DirectoryFull
- Changed default of SOLIDGRIPS to 1
- Restored _GOTOFAQ command
- Fixed ORTHO in Z direction
- Fixed WEDGE command with ORTHO ON
- Fixed crash changing main dictionary in SPELL dialog
- Fixed insert table from CSV comma separated
- Added all dictionary to installation folder and set default dictionary
- Fixed order layers color
- Enabled _EDITLEN Icons
- Fixed linetype combo box
- Fixed EXPLODE command for polyline and nested blocks
- Fixed command line HATCH command to select entities from floodfill algorithm
- Fixed speed of hatch algorithm
- Fixed lost of focus for command hint list
- Fixed open of read-only DXF files version 2013
- Fixed problems with zooming out when one of the viewports in Layout is very small
- Fixed wrong extrusion following a path
- Fixed: If a line is drawn after Zoom-In to the limit, then the line disappears.
- Fixed: Inverted RGB colors during the PDF EXPORTATION
- Fixed: Export a drawing with images to PDF creates huge and corrupted pdf
- Fixed: Setting “Recent drawing list size” (NFILELIST) to 0 leads to ICAD crash on drawing opening
- Fixed: Fixed hatch boundary algorithm with overlapped edges
- Fixed context menu with old menus read from registry
- Fixed EasyArch stair construction bug when changing to meter units
- Fixed color string in General property panel
- Added support to the Large Buttons
- Added 3D Box properties to property palette (only reading of geometric values from object, cannot modify yet)
- Fixed wrong sentence in table properties
- Added CTRL+A to layer property palette
- Fixed Table creation dialog to store and reuse data
- Fixed edit using 3D solid grips and improved performances
- Fixed LOFT command removing “construction” solids
- Implemented PDF/A for PDF printer
- Fixed QLEADER removing “flash” at 0,0 starting jig
- Fixed mtext option in QLEADER command
- Fixed Alignment of MTEXT in QLEADER command
- Added support to Multiline attribute in EATTEDIT dialog
- Added icedEditMTextInteractive to IRX
- Fixed crash in BATTMAN dialog changing TAG of attribute definition
- Fixed stretch of Hatches to maintain associate objects
- Reset previous selection starting STRETCH
- Fixed STRETCH command with HATCH
- Added option to preserve thickness values into DOCFAEXPORT command
- Fixed memory loading accelerators
- Fixed EXPLODE during refedit session
- Fixed DIMCONTINUE command on paper space viewports
- Implemented frame around text of QLEADER
- Enabled scrollbars during dragging operations (LINE, MOVE, COPY etc…)
- Fixed some texts in crashreport dialog
- Fixed boundary finding procedure with overlapped edges
- Improved hatch area algorithm with non visible boundaries, removed UCSICON and GRID enable and disable
- Fixed hatch boundary algorithm to find the right way to close a path
- Fixed QSELECT with custom objects
- Fixed bug footer constrain
- Fixed many errors with a VBA that opens and closes multiple drawings
- Fixed area of hatches and added Area property in VB
- Fixed Hatch with blocks and strange geometrics problem to decide if a point is outside a polygon
- Fixed COPYM command with ACIS objects
- Fixed COPYM with measure option
- Added vl-load-com lisp function
- Fixed crash that occurs while loading user folder with specific drawings
- Fixed ACIS solid corruption after closing and re-opening a drawing
- Fixed TRIM command for 2D and 3D polyline
- Fixed print preview. In some circumstances, vectorization was failing and some items were not visible
- Fixed erroneous random generation of icadplot.log file
- Fixed zoom extension issue with splines having overlapping points
- Fixed custom icon that was causing error messages
- Added some controls to palette features to avoid crashes
- Fixed occasional crashes while opening some files
- Fixed polyface mesh that were not displayed
Changelog version 14.0.8.15
- Various misc. bug fixes
- Mech-Q improvements including a new Cross Ducting Fitting option
- Implemented new BATTMAN dialog
- Improved speed of layer palette changing layer’s properties
- Improved EXTRUDE and REVOLVE command with multiple select
- Improved table edit, now the enter key moves to the cell below
- Changed ETRACKDELAY to 200 ms
- Fixed erroneous behavior after resuming the PC from a sleep state
- Fixed crash displaying some tiff on windows XP
- Changed default for OSMODE and AUTOSNAP to enable POLAR, ETRACK and esnaps INT,END,CEN
- Fixed COPYFULLPATH command to empty all other clipboard data
- Fixed open of DXF files version 2013
- Fixed changes of ALIAS with command hint list
- Fixed ‘vlax-ename->vla-object’ for spline and leader objects
- Fixed RGB inversion – Inverted RGB colors in during the PDF EXPORTATION
- Fixed palette set in B/W images
- Fixed BLOCK dialog with block names with ‘,’
- Improved LAYERP logger procedure to avoid save and delete of temporary layer state
- Disabled ExportPDF3D command when no drawing is opened. Disabled DwgProps command when no drawing is opened
- Fixed exception in LMAN with specific drawing
- Fixed DATE variable now returns local time
- Fixed PUBLISH with spline objects
- Removed main viewport from selection set selected by QSELECT to avoid problem in case of erase
- Fixed dcl crash with (mode_tile “xxx” 2) before (start_dialog)
- Fixed PDF2CAD without open drawings
- Fixed update of linetype combo box
- Fixed crash while moving entities in a specific drawing
- Fixed: VBA – Block.AddItems() should not change block origin to (0,0,0)
- Fixed: Center snap is incorrect for some entities if elevation is different from zero
- Fixed: OSNAP does not work on PDF underlay
- Fixed: Export a drawing with images to PDF creates huge and corrupted pdf
- Fixed: Cannot set Window Print Area when Command Bar is floating
- Fixed: ZOOM Extents zooming incorrect on blocks with more than 59 entities
- Fixed: Tollbars position is not stored properly
- Fixed Crash on startup
- Fixed dwgname in DWGPROPS dialog, tab tooltip and OPENFOLDER command for dwg with 2013 format
- Fixed bad memory release with monochrome images
- Removed error messagebox during creation of toolbars and replaced with log
- Changed DRAGDETAIL variable to 0 to fix problem of dragging (MOVE,ROTATE) of objects at large coordinates
- Added unknown object types to QSELECT dialog
- Fixed stretch to move hatch
- Fixed creation of new menu items from customize dialog
- Fixed height of text pasted from LibreOffice/OpenOffice tables
- Added DEL button to remove layout from PUBLISH dialog
- Fixed import of plot settings using PUBLISH, now it displays also inches unit
- Added more items to tab context menu and implemented missing commands
- Fixed localization of EXPRESS module
- Fixed Red and Blue inversion in PUBLISH of PDF
- Fixed PUBLISH of bitonal images
- Fixed Extrude command: enabled multiple selection
- Edited profile editor option dialog, changed default profile enable/disable buttons
- Added reset all profiles button. Removed multi-line selection
- Added check to avoid crash for buffer overrun
- Added check to avoid crash from layer palette
- Reduced size of pdf produced by PUBLISH with great images or clipped ones
- Reenabled GDAL to manage TIFF to insert GEOTIFF images
- Fixed DBMOD state on some drawings.
- Fixed PDF printer code with the JPEG and TIFF modules enabled
- Added NEXTLAYOUT and PREVLAYOUT commands to manage CTRL+PAGE UP and CTRL+PAGE DOWN accelerators
- Added check to avoid exception in property palette
- Fixed display of scientific number with DIMZIN to suppress trailing zero
- Fixed scale of image using property palette
- Fixed double click on table to edit, now it doesn’t start anymore PROPERTIES command
- Fixed: DXFOUT command locks its output file
- Fixed selection of “Multiple” in QSELECT element type combo
- Fixed draworder in text mask command
- Fixed some problems on EasyArch 3D
- Fixed access violation on creation of solid text mask.
- Fixed BLOCK dialog creating block in wrong space when TILEMODE=0 and CVPORT>1
- Fixed a bug on EasyArch 3D zmove command
- Fixed PSELECT command to select entities for property palette
- Fixed shortcut key to call “From” esnap in Esnap context menu
- Fixed UCSNAME display in property palette with standard UCS (FRONT,BACK,RIGHT,LEFT…)
- Fixed remove text mask
- Fixed SOLIDGRIP with large coordinates solid and overlapping grips
- Fixed property palette project to remove “active context” exception
- Fixed WBLOCK saving file without extension
- Fixed attach of xref using -XREF, now it attaches full path
- Fixed LAYLCK and LAYULK with XREFs
- Disabled WCLOSE and WCLOSEALL during refedit session
- Fixed order of combo in qselect dialog
- Fixed commands REVSURF,AI_REVSURF,REVOLVE,TABSURF,AI_TABSURF,EXTRUDE,RULESURF,AI_RULESURF,LOFT. AI_XXX and XXXSURF commands create meshes, the other ones instead have MODE option to create ACIS surfaces or ACIS solids
- Fixed some EasyArch 3D bug when using variable height walls
- Added NONE option to ESNAP/OSNAP command
- Fixed TDINDWG variable
- Fixed name and tip of Revolved surface in property palette
- Fixed visualization of solid surface with customized isolines
- Added Revolved Surface entity in property palette
- Fixed wrong hatch origin
- Fixed Ungroup of multiple groups
- Fixed PDF creation problem and fixed use of TFW file
- Fixed SNAPGRIPLEGACY from list setvar
- Fixed CRTL + grip drag on table objects
- Fixed BLOCK dialog, now it reloads some data selecting a block name from list
- Fixed DIMLINEAR with ORTHO
- Fixed GRIP using keyboard shortcut to move selected objects
- Fixed localization of “*VARIES*” in property palette
- VBA – enabled editing for tUpsideDown and tBackward options for text entity
- Fixed cancel of discard of changes on REFCLOSE command
- Implemented Import page setup button in page setup manager and added IMPORTPAGESETUP command
- Fixed the errors when used custom unit factor
- Fixed wrong wall calculation on ARC doors/windows
- Fixed selection of blocks/attributes in EATTEXT dialog
- Fixed unexpected change of zoom when you use the render in a perspective view
- Changed the reference to 2DWALL and 3DWALL layers
- Added new layers to EasyArch 3D to be managed with different colours
- Fixed size of controls in PNEW dialog
- Fixed separate option with TEXT inside hatching area
- Added SPACe feature to cycle between grip functions
- Fixed: AUDIT leads to creation of redundant text entities
- Fixed: FLATTEN moves entity to current layer
- Fixed Crash during print preview
- Fixed: Shape names from SHX files should be handled as case-insensitive
- Fixed: Unable to unload IRX
- Fixed huge amount of ram used by a specific drawing
- Fixed: (getorient) lisp function not working
- Fixed: sds_getorient doesn’t accept E or N90E as input
- LISP (entupd) and sds_entupd don’t update block reference if block was modified
- Fixed “AutoSave drawing extension” position in options dialog
- Fixed AREA command. Now it uses LUPREC to print Area value
- Fixed default value for FILLETRAD variable
- Improved scale command on Table
- Fixed command hint window: Added mouse right click management, added check in OPTIONS dialog and menu item in context menu over command line to enable/disable this feature
- Increased dimension of a button in DIMSTYLE dialog to fit some languages
- Fixed: MINSERT does not insert the blocks with the correct rotation with non-global ucs
- Fixed underlined char in one EattEdit dialog
- Added Standard Scale combo in property palette about viewport entities
- Fixed search path of drawing converted from dwg 2013 format
- Removed duplication of VL-LIST->STRING function
- VBA – Implemented SliceSolid method
- VBA – Implemented SetPaperSize method
- VBA – Implemented SectionSolid method
- VBA – Implemented CheckInterference method
- VBA – Implemented Purge method
- Cannot rotate entites at non-zero elevation when in non-plan view
- Fixed Crash during zooming when grips are shown in PS viewport
- Fixed print problem when LWDEFAULT is 0 (printed borders were shifted)
- Fixed Snapping on 3DSOLIDS in Blocks
- Cannot get Nearest snap point for line if there are some attributes in block under cursor
- Fixed PEDIT JOIN (erroneous segment removal from the new polyline)
- Fixed Error using MatchProp on the dimensions
- Fixed: Cannot snap to the end of Splined Leader
- Fixed: Different behavior using SOLIDEDIT command to extrude a face
- Fixed: New frozen layer created by VPLAYER is not frozen
- Fixed: Printing doesn’t work from shell commands
- Fixed: LIST command doesn’t display bulge for last node in polyline
- Fixed: Hatching of visually closed POLYLINE fails
- Fixed Deadlock in ATTDEF dialog
- Fixed: sds_sslength should set length to 0 in case of failure
- Fixed: LUPREC shouldn’t affect scale values in IMAGE attach dialog
- Fixed: Deadlock in CONVERTPSTYLES during recomputing HATCH boundary with HPGAPTOL=1
- Fixed several crash changing color or deleting entities or at close time
- Fixed problem plotting specific drawing
- MTEXT is always created in World UCS
- Entget does not return DXF 74 (and 73) group code from ATTDEF/attribute
- MATCHPROP doesn’t work for viewports
- Dimension “Fit” and “Text Movement” fields issue.
- Fixed: Stretch grip from External application fails
- Using (initget) with keywords leads to an error message with garbage symbols in case of entering empty string
- Fixed: Cannot get node snap in xref drawing when PDMODE is not zero
- Fixed wrong attributes order in BLOCK command
- VBA – Fixed Crash on AppendItems
- Fixed Issue in MASSPROP command (Centroid)
- Fixed crash undoing a viewport creation or layout switch
- Fixed DRAWORDER after copying incorrect
- Fixed: LIST command doesn’t show attribute name
- Fixed: Zoom extents doesn’t work when first opening a drawing
- Fixed Crash in PURGE Reviewed
- Fixed: RTDISPLAY must be ignored for custom entities
- Paper size is not read properly from DWG
- Wrong print preview using particular Printer Settings
- Fixed Crash doing PAN
- Fixed: Text is displayed wrong (paragraph formatting)
- Fixed: WBLOCK, INSERT and OPEN command should have separate, their own paths for drawings
- Fixed: Bad UNC paths in references cause severe delays
- Fixed: Cannot switch to PSpace from Viewport by double click if “Print paperspace last” is disabled
- Fixed: Wrong TTF font is used for printing
- Fixed: Viewport moves when “print upside-down” is toggled on during printing
- Fixed Copy/Paste crash
- VBA : fixed activeLayout.GetPlotStyleTableNames property
- Added resize feature in attribute selection dialog of EATTEXT command
- Fixed menu commands for _refclose _save and, _refclose _discard
- Fixed space header/footer text issue
- Fixed property palette for polyline2d entities, added global width and fixed single vertex widths
- Fixed drag preview of rotation inserting a block without moving the cursor
- Fixed height property into QSELECT dialog for TEXT objects
- Removed rename of blocks and attributes from EATTEXT dialog
- Fixed position of sample text in font dialog
- Fixed RENAME command that allowed to rename layer 0
- Fixed some issues on dynamic block grip
- Fixed double click on corrupted drawings
- Fixed order of layer filters
- Fixed font in raster dialogs
Changelog version 13.0.18.8
- Various improvements to the 3D Piping inside Mech-Q
- Improved UCS manipulation and dynamic rotation of fittings before placement in Mech-Q
- Added some check to avoid exception in property palette and selection after ESC of gripedit
- Fixed start of AViCAD from vbs, now it loads all IRXs
- Fixed change of circle associated with a dimension
- Added some check to avoid exception drawing UCSicon erasing some viewports
- Fixed NLM server connection function
- Fixed load of ANSI mnu file with some nordic characters (example :‰)
- Added check to avoid crash in property dialog scrollbar sizing function
- Improved speed of refresh property palette reloading layer combo values only if it needs
- Changed a tooltip in PUBLISH dialog
- Fixed tooltip of save and load publish list in PUBLISH dialog
- Set HYPERLINKICON default to 0
- Fixed Fylout position
- Fixed the 256 color “Black” button in background color selection
- Improved speed of QSELECT command on large drawings
- Fixed show of command bar when AViCAD was closed without it
- Fixed viewport scale panning in activated viewport
- Fixed the bug with the APPLY button of FONT dialog
- Fixed the bug with grid color not changing in DDRMODES dialog
- Fixed redefine of existing blocks
- Fixed the bug with the impossibility of insert 3-digits true color in COLOR selection dialog
- Fixed crash using BATTMAN command
- Fixed some options in menu using international options adding “_”
- fixed open of some drawings with some bad spline
- Added feedback send for NLMServer token activation
- Fixed crash while copying some entities between 2 drawings using specific format of other cads
- Fixed crash using publish with Amyuni PDF/JPG printer
- Fixed cone command with center of base with z != 0, fixed elevation after cone command is now restored to original value
- Fixed DIMRAD and DIMDIAMETER command to dimension circle/arc inside scaled blocks
- Added LAYERCLOSE command to close LAYER palette, added OLMSTATE variable to check if layer palette is open, Added ability to CTRL+2 accelerator to close layer palette
- Unable to join using “_pedit” command, lines disappear
- Fixed close of floating toolbar
- Added MNU update mechanism
- Restored APBOX default value to 0
- Added CTRL+RETURN to close MTEXT edit dialog
- Fixed SELGRIPS command when are already selected some entities
- Added try and catch to avoid deactivate activation context problems
- Fixed crash on double click on mtext after close of a drawing
- Fixed VBA FontFile method
- Fixed EXTRUDE command preselecting entities
- Fixed plot from VBA setting parameters
- Added check on MTEXT dialog
- Different direction of extrusion using polylines to make rectangles
- Restored new OPEN common dialog
- Fixed right click context menu
- Fixed intersection of etrack/polar alignment lines
- Fixed Etrack/Polar in NWUCS
- Added server ip and port to the command line of NLMServerMonitor
- Changed status bar and CTRL + 2 to call LAYER command instead EXPLAYER
- Fixed change of description of layers in layer dialog
- Fixed layer dialog restored display of latest columns values
- Added command line xml report to NLMServer and NLMServerMonitor
- Fixed message during RECOVERYMANAGER command during load of some drawings
- Fixed problem on WBLOCK dialog selecting file name
- Fixed starting color of hatch taking active one
- Added MLSTYLE command to custutils project
- Changed the menu loading procedure in order to accept UTF-8 files
- Added check on MIRROR command to avoid regen if only one entity is affected
- Fixed conversion problem in property dialog
- Fixed .bak creation using only ISAVEMAK variable, removed MAKEBAK variable
- Fixed icdbLoadMlineStyleFile to load linetypes used by mln file
- Fixed icGetColorDialog to get also RGB and colorBook colors
- Changed PreviewEntity control to support multiple entities preview
- Changed icDrawEntityToDC to icDrawEntitiesToDC to draw multiple entities on a DC
- Minor change to layer dialog getting wrong plot style from API
- Added ability to set plot style to layer from layer palette
- Added icGetPlotStyleDialog to IRX interface to select Plot Style
- Fixed command after VBA.InsertBlock
- Fixed preview control preview image was upside-down
- Added ADDFORM command to add customized paper size to some printers (our PDF,JPG and some others)
- Added preview control in create table dialog
- Added CEntityPreview control to display an entity in a control
- Added icDrawEntityToDC api to draw an entity to a DC
- Fixed icdbLoadMlineStyleFile function to load a file twice and fixed reading of angles in grads
- Fixed load of multiple style mln file with a specific requested style
- Fixed an error on EasyArch dcl
- Fixed load of specific MLSTYLE from a file
- Fixed icdbLoadMlineStyleFile function to load multiple MLINE style
- Fixed PDF printer with custom paper size
- Added message on command REFCLOSE when it fails
- Fixed load of layer combo in property palette to increase speed of common operations (ZOOM/PAN)
- Fixed layer palette that slows down LAYISO command on large drawing. Improved refresh of layer palette adding a timer to stack all refreshes
- Fixed load of UTF-8/UNICODE toolbars
- Adjusted Table compilation for EasyArch2d
- Fixed linetype combo box, now when is selected some entities it doesn’t change active linetype
- Fixed Plotter manager dialog with our PDF/JPG printers
- Fixed LMAN dialog creating a new state with a drawing with a group or a filter of layers
- Fixed print of text with ISOCP,CALIBRI,PALATINO TT fonts
- DDEDIT changes justification of text
- AViCAD color dialog should be used in Print Style Table Editor instead of Windows color dialog
- Wrong value is displayed for snap rotation (“SNAP -> Rotation” command)
- Crash on opening TEXT editor
- When PRINTTEXTOUT=1, xref clipping doesn’t work properly for printing
- Alternate Font is not used for missing truetype fonts
- Cannot create hatch in active viewport
- Cannot import PGP file with TAB
- cannot use esnap NEAR with “little” (radius ~ 0.1) circle
- Cannot use snap INT with MLINE entities
- Many problems using ssget from lisp (or SDS)
- VB function GetObject, after CreateObject, doesn’t work
- Wrong range and default value for FIELDEVAL variable
- crash moving between model space and layout 1
- Image command
- SelectOnScreen doesn’t highlight entities during selection
- VBA Hatch.ApplyHatch is not implemented
- Mouse movement is slow while a command is active in heavy drawings
- _refedit command: need a message before block editing
- -IMAGE – Detach removes IMAGE entities instead of IMAGE definitions
- Ability to turn off real-time Orbit and Twist (by Ctrl+Click) is required
- ACISOUT cannot create ACIS SAT file other then version 700
- ACISVER doesn’t return correct version number of ACIS.
- Activating Antialiasing produce a section (not desired) in the rendered objects
- Add cut/copy/paste features to MTEXT documentation
- AddVertex doesn’t work
- ArchT Hangs on Autosave Comment: Main engine thread allows process send messages during execute UI actions now.
- Assertion is shown when attempt to detach a XREF
- Association doesn’t work for Aligned Dimension
- AttachExternalReference method of Modelspace fails
- Attempt to open any drawing in icad.lsp, *.mnl or in other startup sequence member leads to incorrect behavior
- ATTEXT issue
- Bad print style file results in improperly handled condition.
- Block changing position during Zoom operation
- Cannot attach image files different from jpeg using AViCAD Explorer
- Cannot create Wipeout via (entmake) properly
- Cannot do center snap to arc segment of closed polyline
- Cannot control Osnap tooltips properly
- Closed method on LWPolyline doesn’t work
- Context menu does not allow to copy more than 100 selected entities
- Context menu imported from MNU file always shown in main menu
- Context menu is opened with some delay if select a lot of entities.
- Context menu on RMB is much too big. It is very confusing and overwhelming
- Crash in EXPLORER during erasing layers (Win8 only)
- Crash on saveas in particular drawings
- Crash right after calling CONVERTPSTYLES
- Crash when entity selected on the previous drawing is modified on a new drawing
- Cursor slows down with “selectionpreview”
- Deadlock in OpenGL on AViCAD start
- DIMDISASSOCIATE command doesn’t work
- Dimension on block
- DIMRADIUS issue on object with Z <> 0
- Direct entry of Unicode codes does not work in MTEXT dialog
- Document use of commas for aligning text in headers and footers
- DRAGNDROP doesn’t work for attached drawing
- Improvement in DRAWORDER performance
- During SELECTIVEREGENMODE=0, out-of-view raster image disappears when regen is performed
- DWG association with AViCAD doesn’t work on some machines
- Entities from nested XREFs are not visible in Layout
- Entity goes to bad state by DEL command with enabled SELECTIONPREVIEW (3) and HIGHLIGHTLIMIT>0
- Entity snap glyphs are not displayed if launch AViCAD and create or open a drawing
- entmake for blocks always calls Regen
- Entmake should create a entity specific handler for as many entities as possible.
- Error during the image editing with the ORTHO function ON
- (acad_colordlg) if flag=nil to disable ByLayer/ByBlock, the “Black” button returns 256
- (ssget “ALL) does not work
- [Crash] Cannot FLATTEN a leader
- [Crash] Crash on open – problem with Activation Context
- [CRASH] Deleting viewport causes crash
- [Crash] AViCAD crashes sometimes on drawing closing when it occurs simultaneously with RealTime view change
- [ENTPROP] sorting layer list
- Excel document cannot be inserted
- Exception if UNDO after REFCLOSE
- Exploding blocks causes draworder change
- Failed -DIMSTYLE command ANnotation option
- For attached drawing – polyline is not drawn at the top of other entities during selectionpreview
- General issue of calling commands from explorer
- get_ProductOfInertia COM method is not implemented
- GetEntity, GetInput and keywords do not works
- AViCAD doesn’t set proper SDS function code when SDS function is registered by sds_regfunc
- AViCAD occasionally crashed when exploding a block
- ICADDoc.lsp is not called in case of run AViCAD by opening .dwg in explorer
- icedGetPoint does not show pointer properly
- icedSetCurrentView doesn’t refresh temporary graphics
- If MNL file for some MNU contains MENULOAD command call, corresponding MNL file won’t be handled if it contains LISP (command) calls
- -IMAGE -> Detach removes image entities instead of image definitions
- IMPORT PGP function fails in ITALIAN language
- INSERT command crash block has attributes and ATTREQ=1 and ATTDIA=1
- INSERT command disable scale y and x field when user choose uniform block
- INSERT command rotation default value use AUNITS and AUPREC
- INSERT object disappears after closing the “AViCAD Explorer”
- Inserting a Block with const attdef make wrong data
- Issue in PRINT operation with WINDOW option
- LENGTHEN command for polylines changes entity Layer to current
- LISP ssget filter 430 set wrong selection set
- LIST command does not display bulge for last node in polyline
- List of blocks is not displayed in AViCAD Explorer if open any drawing with blocks
- Fixed MASSPROP issue.
- Middle mouse button should activate PAN command.
- Missing paper rectangle on layouts
- MNL scripts are not loaded properly when several drawings are opened at once
- MTEXT entities are shown incorrectly in attached drawing
- multiline text change position
- Nearest snap overrules the grid and Ortho function
- Need to implement context menu for options->paths settings.
- OSNAP markers are not visible when used for entity filled by the same color as snap markers
- Parallel snapping doesn’t work for XREF
- Particular JPEG 2K image does not display in color as it should
- Polar tracking works wrong in NWUCS – Extension snap works incorrectly in UCS for linear entities
- PRIMARY UNITS SCALE for dimensions, doesn’t work in the layout
- Print SCALED IMAGE problem
- Print style table editor doesn’t release acquired GDI resources
- AViCAD doesn’t recognize the coordinate position in the MNU file
- Refedit command is limited at the first two block levels
- Rendering does not work with perspective ON
- Right click pop-up menu option in drawing window to have recent commands
- Right-click menu disappears if mouse is moving at the moment of clicking
- ROTATE command does not take angle input in form 45∞28’40”
- RQXLOAD event not called everytime a drawing is opened/created
- SDS function code can be corrupted by commands called from SDS_CBCMDBEGIN callback
- sds_getstring return wrong string from script
- sds_ssget() does not work correctly on off layers
- Search path is growing when attaching XREF’s
- SelectOnScreen doesn’t close selection
- Size error when inserting raster image
- Some polylines in attached drawing are not visible during Print Preview
- SPLINEDIT layer issue
- STRETCH doesn’t work correctly if polyline has 0,0,-1 normal
- Style and Language fields are empty if create a new style using -STYLE command
- STYLE command font problems
- System variable PRODUCT must be read-only
- The objects with thickness different from “0” are not printed using its lineweight
- The order of entities in the selection set is not consistent
- The selection of the hatch area depends from the zoom level
- The UCSVP variable has a strange effect on the height while drawing
- The VBA entity creation doesn’t set Defaults properties
- Toolbars can be lost (not restored) on restart of AViCAD
- U.S./Imperial Units support for Export PDF
- Unable to scroll drawing with specific keys
- UserCoordinateSystems.Add, method does not behave correctly
- Utility.Prompt doesn’t support new line character in the message
- VBA – Entity.ArrayPolar() copy wrong space when TILEMODE=0 & CVPORT=2
- VBA AddLeader method and Annotation property compatibility issue
- VBA AttachExternalReference() have to check block Name is defined
- VBA Block.AddItems always delete existing objects in the block
- VBA ConvertArrayToPoints become Out Of Memory Error
- VBA does not set object height as 0.0
- VBA GetEntity cannot recoginize OdDb2dPolyline
- VBA AViCAD Crash when set duplicated table record name
- VBA Offset creates new objects but doesn’t append to Database
- VBA selection set filter support more group codes
- VBA Some AddXXXX() methods cannot create object into user defined block or inactive paper layout block.
- VBA Utility.WildCardMatch is not implemented
- VBA which functions returns E_NOTIMPL
- VBA, New keyword only works the first time
- WBLOCK/-WBLOCK fail silently when trying to write to an open file
- When you place your cursor on the dimension text, snap point on the dimension line is obtained.
- Wrong behavior if REFEDIT read-only xref
- Wrong visualization in layout using an hidden view
- XREF problem with GRADS
- Xref reloader does not work
Changelog version 13.0.16
- Fixed starting color of hatch taking active one
- Added grips to entities selected via VBA.ActiveSelectionSet
- Fixed command after VBA.InsertBlock
- Fixed display of plot style in layer dialog
- Updated Amyuni PDF Converter from version 4.5.3.5 to version 4.5.3.7
- Localized some tooltips in hatch dialog
- Implemented SetView function in VBA
- Fixed Import and Export of DXF from VBA
- Fixed VBA CreateColor parameter now uses RGB value
- Fixed crash detaching not found xref
- Fixed message during RECOVERYMANAGER command that stops load of some drawings
- Removed progress bar from splash screen to avoid deadlock during startup
- Added lock to avoid update of drawing during IRX load
- Fixed problem on WBLOCK dialog selecting file name
- Added check on MIRROR command to avoid regen if only one entity is affected
- Fixed conversion problem in property dialog
- Fixed .bak creation using only ISAVEMAK variable, removed MAKEBAK variable
- Fixed icdbLoadMlineStyleFile to load linetypes used by mln file
- Implemented VBA.PurgeAll method
- Fixed icGetColorDialog to get also RGB and colorBook colors
- Fixed Import and Export of DXF from VBA
- Fixed an error on EasyArch dcl
- Fixed VBA Export function to export DXF files
- Modified the Sources sentences for PLINE command
- Fixed problem on icGetLinetypeDialog api
- Fixed collinear walls in EasyArch
- Fixed print area including borders
- Fixed perspective view render and render with antialias
- Enabled print transparecy images
- Fixed helpstring on status bar of flyout buttons
- Fixed “Fractional type” property for dimensions in property dialog
- Fixed default value for REGENMODEGLOBAL to 0 to disable popup balloon during zoom
- Restored “Select by properties menu” to call Filter option and added “Quick select” to call QSelect
- Fixed localization of QSELECT command
- Fixed right click context menu with a number of selected entities > of GRIPOBJLIMIT
- Fixed RECOVERYMODE variable setting
- Fixed creation of new UCS from VBA
- Added old VBA.Workspace events
- Fixed placement of docked toolbars imported from MNU
- Fixed position of imported (from MNU) floating toolbars
- Fixed EXTRUDE command. Fixed Extruded entities position and fixed region extrusion.
- Fixed property palette alignment point for TEXT and ATTRIBUTE definition
- Fixed mesh menus
- Fixed some issues that could cause exceptions
- Fixed QDIM with NWUCS
- Fixed intersection snap between LINEs and MLINEs
- Fixed crash selecting center osnap on some cylindric 3d solids
- Fixed VBA SelectOnScreen to highlight selected entities, disable right click menu, command line message and cursor shape
- Fixed PICKADD checkbox in options dialog
- Fixed creation of a block with many entities from VBA
- implemented VBA ApplyHatch method
- Added redraw in Layer palette to force redraw of drawing after layer change
- Alternate Font is not used for missing truetype fonts.
- Fixed NEAR esnap when PARALLEL is active
- Added Multileader,Image,Table and Multiline to QSELECT dialog
- Fixed hatch dialog with dimension
- Fixed hatch dialog and boundary dialog height
- Fixed a problem with TRIM and rectangle selection set
- Fixed VB GetObject taking an instance created using a previous CreateObject
- Added ObjectModified, ObjectAdded, ObjectErased events to VBA Document
- Fixed the dimensions of the imported Google Earth images
- Removed control over the file name for the FONTALT into Options Dialog
- Changed default FONTALT variable, from ic-simplex.shx to simplex.shx
- Added TrueColor property to improve compatibility with Autocad
- Added few properties and methods to VBA Document object
- Implemented new VL, VLA and VLAX functions:
- vlax-get-acad-object, vla-get-activedocument, vla-get-modelspace, vlax-get-property,
- vlax-put-property, vla-get-count, vla-item, vlax-vla-object->ename, vlax-ename->vla-object,
- vlax-curve-getpointatdist, vlax-sevice-print, vl-vbaload, vl-vbarun, vl-prin1-to-string,
- vla-get-Height, vla-get-WindowState, vla-put-Height, vla-put-Lock, vla-put-Width,
- vla-put-WindowState, vlax-Release-Object, vlax-safearray->list, vlax-variant-value,
- vlax-Create-Object, vlax-get-or-create-object, vlax-getinterfaceobject, vla-delete,
- vla-get-registeredapplications, vla-get-utility, vlax-curve-getarea, vlax-curve-getclosestpointto,
- vlax-curve-getclosestpointtoprojection, vlax-curve-getdistatparam, vlax-curve-getdistatpoint,
- vlax-curve-getendparam, vlax-curve-getendpoint, vlax-curve-getfirstderiv, vlax-curve-getparamatdist,
- vlax-curve-getparamatpoint, vlax-curve-getpointatparam, vlax-curve-getsecondderiv,
- vlax-curve-getstartparam, vlax-curve-getstartpoint, vlax-curve-isclosed, vlax-curve-isperiodic,
- vlax-curve-isplanar, VlaxInvokeMethodProxy
- Fixed crash when JPG printer is not installed
- Fixed print of scaled image
- VBA.AddVertex doesn’t work
- Fixed QSELECT with only one command active
- VBA :Fixed creation of hatches in an active viewport of a layout
- Added QSELECT command to select options in command line
- Fixed QSELECT dialog selection of circle by radius
- Added Transparency property to QSELECT dialog
- Fixed QSELECT dialog using some operators searching default DXF values (color, lineweight, linetype, linetype scale, thickness)
- removed standard selection set menu items from CHAMFER and FILLET commands
- Added mechanism to reduce memory footprint changing layout, it starts when REDUCELAYOUTMEMORY variable is ON and when used memory > 2GB or available memory is less than 70%
- Fixed the bug with wrong image dimension ration during the ImportGEImage command with the Google Earth images
- Fixed the bug with foreign command line keywords in IMAGECLIP command
- fixed the bug with the activation of “Apply” button in text style dialog
- Added operator combo to QSELECT dialog and reworked layout
- Fixed display of layout tabs opening drawings
- Fixed DRAWINGTAB command to hide/restore drawing tab
- Added UPDATEFIELD command to force update of field in texts
- Fixed FIELDEVAL variable
- Fixed a couple of minor Express bugs
- Fixed some Express menu items
- Fixed Zoom extension command and fixing UCS icon problem
- Fixed recovery manager to manage also saved file by emergency crash system
- Fixed crash changing layout
- Fixed Emergency save output folder
- Added some check on PDF2CAD destination, now AViCAD checks if the file already exists, right extension specified and output directory exist and has rights to write in
- Changed CIRCLE TanTanTan menu command
- Reverted the NEW command to ask always for a template file
- Fixed color of icons in menu
- Fixed hatch island detection (problem generated during last merge with ITC source)
- Added “remove boundaries” button in hatch dialog
- Added message box to allow to user to show created PDF or JPG after print
- Toolbars can be lost (not restored) on restart of AViCAD
- Cannot select the correct grip of 3D line
- Entity snap glyphs are not displayed if launch AViCAD and create or open a drawing
- [CRASH] Fixed crash due to arithmetic overflow
- When ORTHO is ON you can not draw ortho lines
- Crash by selecting the line
- OLE background color: added OLEBKGCOLOR and USEOLEBKGCOLOR
- AViCAD hangs when open a xref from AViCAD Explorer
- Rulesurf doesn’t work for closed entities
- LENGTHEN command for polylines changes entity Layer to current
- AViCAD freeze during the selection of 3d object in the attached drawing
- INSERT is not working correctly when ORTHO is enabled and insertion point is specified on screen
- [CRASH] Fixed many crashes
- Missing dialog title and possible data corruption
- Grip points of a new drawing are displayed in the previous drawing
- SDS command calls from LISP leave CMDACTIVE in wrong state
- Solid with applied material is invisible
- Autosave improvements
- [Crash] Crash in OpenGL on drawing open/close
- Slow response to select the displacement for moving objects while a command(copy, …) is running
- Improved support for naming of bitmaps in MNU files
- If cancel insertion of a block, AViCAD makes UNDO
- Offset error of 2Dpolyline
- IcadDoc.lsp is not loaded if AViCAD is started using COM
- Additional windows (views) cannot be focused / used
- Polyline linetype is generated with different scale in AViCAD
- [Crash] opening program
- XML Toolbar with resource dll cannot show buttons
- ssget works wrong when filter contains regapp
- No line feed in setvar prompt
- PLINEGEN variable doesn’t affect linetype generation for polylines
- Prompt items are not correct in the -STYLE command
- Entity disappears when it’s layer color is changed
- Wrong stretch of an arc
- 3DSolid visualization issue
- GRIPS=0 forces PICKFIRST on
- An application must register with Default Programs feature to be offered as the default program in Windows Vista and later.
- LISP (ssget) with filters prints wrong number of entities
- DIMSCALE value is not applied to DIMCENTER
- The hatch disappears after copying or moving it
- -DIMSTYLE command doesn’t list dimension styles alphabetically
- -STYLE command doesn’t list styles alphabetically
- Stretch using grips and esnaps does not work right along the Z axis
- COPYEDATA,MOVEEDATA,DELEDATA allow wildcard for source application id
- Wrong visualization in layout (out of layout window and rotated)
- Result of Perpendicular Osnap depends on Zoom Window
- getcorner cannot return keyword like getpoint
- Layers names are not in alphabetical order with -LAYER command
- Error extruding the polyline in this drawing
- EXPLORER delete linetype must not set layer’s ltype to Bylayer
- Inconsistency in ‘lisp’ local variables
- sds_dispobjs returns 2 vertices chains for PFACEs
- Select all entities does not include entities from the viewports different than the current viewport
- [Crash] Crash during panning in locked viewports
- EXPLODE issue on REGION
- SDS initialization/uninitialization RQ request codes usage for applications is wrong!!!
- SDS callback deadlock
- DIMRAD and DIMDIA silently exits if no entity picked
- Entity snaps don’t work for a PlaneSurface
- [Crash] Crashed when switching to Layout2 from Layout1 after dimensions creation
- [Crash] 3D ORBIT
- [Crash] Explorer dwg double click
- [Crash] Attempting to open a new drawing using an existing template
- Text dimension in edit text dialog (single line text)
- Cannot to snap to grip points during grips dragging
- ZOOM Dynamic does not work properly in NWUCS
- (sslength) returns RTREAL
- Command REVOLVE does not work when object started from revolution axis
- Improved performance in canUndo() function
- Critical issue during PC3 creation with plotter HP
- Attempt to use HATCH leads to infinite loop for attached drawing
- Insert HATCH problem.
- WIPEOUT entites printed as black rectangles when named print style is used in attached drawing
- Grip editing dimensions should be disallowed when UCS isn’t parallel to ECS
- Different direction of extrusion using polylines to made rectangles
- MTEXT editor to have ability to clear formatting
- Unable to load a .mnu file from path with dot symbol
- Transparent zoom window breaks getpoint jig dragging line
- [Win8]”Could not start print job” message displayed for printers configured on port FILE:
- Incorrect tangent snapping to spline
- PRIMARY UNITS SCALE for dimensions, doesn’t work in the layout
- Do the alignment. Then, a Z coordinate is changed.
- Right click pop-up menu option in drawing window to have recent commands
- Fillets don’t always work for solids using coordinates not in WCS
- Cannot save changes of REFEDIT session by REFCLOSE for test drawing
- Entity is not redrawn when changed via Entity Properties toolbar
- [Crash] Crash during changing color from Entity Properties toolbar
- UNDO option inside Selection state of commands is extremely slow for big number of entities
- LISP (initget) and sds_initget are not interchangeable
- Transparent zoom window breaks getpoint jig dragging line
- 3dSolid is always rendered in grey color (entity material is ignored)
- Unable to define a box with Z negative value
- Crash on open after roundtrip in some scripts on Windows 8
- CHSPACE creates wrong entities when there are twisted viewports in Layout
- The icaddoc.lsp doesn’t executes propriety then opening few drawing at once
- Improved performance of the RTPAN command
- Entity tracking is not working in UCS
- Member needs to know when 3DObit is active or not.
- [Crash] Crash on exit in scripts which uses PDF underlays.
- SDS_CBVARCHANGE notification is not called in all circumstances
- Wrong area calculation for HATCH entities with holes (hole area is added, instead of being subtracted from the total)
- “Pointer defaults to crosshairs” should be enabled by default
- Code for handling pface meshes is throwing with invalid index error
- PEDIT is not working correctly for spline fit and curve fit pline
- FREEZE / THAW switching is too slow
- LAYOFF error
- Apparent intersection snap leaves tracking points
- Wrong behavior of Tangent/Perp/Quad snap in UCS
- Quadrant snap doesn’t work correctly in UCS
- during RTROT the mouse cursor should change to show appropriate orbit mode/constraints
- Undo issue-One of all entities ALWAYS cannot be deleted After Delete & Undo.
- Icon toolbar customization, confused
- Review AllCOM failures and fix bugs or scripts
- Some dimensions are updated incorrectly during COPY and EXPLODE of the block
- Extension snap works incorrectly in UCS for linear entities
- AViCAD doesn’t support Multiline Tooltips for Snaps
- Image manager – image preview is black after an image is erased from the drawing
- Show snap setting on cursor is not working right
- Hatch vs Dimensions issue
- AViCAD uses > 1.6 GB while plot preview and pdf is missing
- Even if “Pointer default to crosshairs” is turning off, Crosshair is seen
- Cursor is reset to crosshair if display options dialog is loaded during active command
- Block dimensions are moved in wrong places
- Serious problem with DIMRADIUS / DIMCENTER on blocks
- Pan command does not change cursor type
- Object tracking does not work from lisp routine
- Zoom Dynamic has several problems
- Second crosshair appears and freezes after switching drawings by Ctrl+Tab
- Resizing images by grip points works incorrectly
- Missing SDS_CBDOCCHG notification when closing a drawing.
- ZOOM command options are incoherent comparing POP UP and Command Prompt
- Mouseover (SELECTIONPREVIEW) highlighting makes cursor very slow and jumpy when zoomed in on image in attached drawing
- Extension snap is not working for elliptical arc in WCS and for all entities in UCS
- Icad can’t extrude region on a closed polyline
- OLE2FRAME disappears after redefining block
- Grammatical mistake in the prompt while redefining block
- OSNAP points are not implemented for SubDMesh entities
- No linetypes are loaded by -LINETYPE command if .lin file contains some invalid data
- -GROUP command creates only even unnamed groups
- ZOOMWHEEL sysvar is treated as a boolean, instead of 0/1 value insinuating it turns zoomwheel on/off.
- Parallel snap doesn’t work if enable Parallel and Extension snaps
- “Select all” button needs to be added to the Entity Snap Settings dialog
- When app is loaded via Icad.sds the request msg SDS_RQXLOAD is fired before AViCAD is initialized
- Images on OFF layers affect performace
- AViCAD always uses the same CPU on multi-core systems causing performance issues when multiple sessions are run on the same machine
- Cursor slows down with “selectionpreview”
- Russian Linetypes with ” in definition do not load
- Custom OSNAPs don’t work
- ssget, viewports and layout
- Sometimes AUTOSAVE doesn’t work when ICAD window is inactive
- Linetypes loading is stopped as soon as linetype with unknown font is met in .lin file
- ETRACK: Arc & Elliptical arc behave badly for _EXT osnap in non-world-UCS
- The print preview does not show all the entities in the layout
- Incorrect PERPENDICULAR snap to arc segments of PLINE in NWUCS
- A new anonymous block can not be inserted if we tried before to add another anonymous block two times
- [VBA] I can not create the DIMSTYLE.
- MTEXT editor renders text very different from the drawing
- Cannot enable more then one snap using the command line while a command is active
- Disappearing blocks on large coordinates
- JPEG image does not open
- Bigfont load problem
- Text string is not printed correctly in some cases
- PURGE does not complete initialization on attached drawing
- getPoint without base point is not working when ORTHO is enabled
- ARC definition bug
- AViCAD hangs if explore groups in a drawing with a huge number of groups
- AViCAD hangs if display all groups in the Group dialog in a drawing with a huge number of groups
- Sorting groups by name works very slow…
- REVOLVE and UCS fail
- Fixed occasional crash occurring during printing
- Hatches are shown with low density in AViCAD
- Deadlock if callback is called at the same time when COM Job is sent to Main Engine, which is waiting for Main thread
- VIEWCTL command doesn’t works in the LAYOUT VIEWPORTS
- If you execute an INSERT and press RMB then RTCAN has to be returned
- Attempt to change image path in the Explorer leads to crash
- IMAGE path updating functionality is not working
- ICAD is deadlocked when sds_draggen callback performs any operation with dialog created by SDS app
- DROP-DOWN COLOR LIST issue
- Some entities in NWUCS are not being handled properly
- Incorrect prompt if hatch area not fully visible in window
- Crash in INSERT command
- MIRRTEXT = OFF, Horizontal problem
- PURGE command doesn’t delete UNNAMED GROUPS
- Wrong ETRACK behavior
- AViCAD crashes during changing entities color
- Cursor freezes when trying PERPENDICULAR snap to spline in NWUCS
- Strecth by grips error of hatch entity
- Command “Convert to Mesh”(3DCONVERT) does not work
- Aligned dimension shows incorrect text for MSPACE entities in PSPACE
- Fillet is created in wrong UCS
- Setting zero scale for viewport causes crash
- Periodical crash in Array command
- LISP variable types are being promoted long to real and short to long
- Deleted entity can not be added to the selection set
- Fixed JUSTIFICATION > FIT error
Changelog version 13.0.14
- Added PUBLISH command
- Fixed several crashes
- Fixed paper size order in print dialog
- Restored name of block in QSELECT list
- Fixed localization of some sentence in Recover manager dialog
- LISP : Added vl-cmdf function to VLISP project
- LISP : Added layoutlist lisp function
- Inserted error message for conversion PDF to JPG
- Upgraded PDF and JPG driver from version 4.5.3.3 to version 4.5.3.5
- Fixed missing uninstall part for pdf printer
- Fixed UCS toolbar, button ORIGIN.
- PDF2CAD : set tickness to 0 for all entities converted
- PDF2CAD : removed request to open files
- PDF2CAD : fixed some messages
- Fixed creation of PC3 with specific option in HP Djet 500 plotter
- Fixed esnap NEAR to circle with little radius (0.1)
- Fixed OFFSET error of 2Dpolyline
- Fixed import of PGP files with tabs
- Fixed icad.fmp file to remove substitution of fonts
- Fixed crash opening drawing with password and scrollbars activated
- Global linetpe scale – Property dialog not working
- Fixed crash using Explorer->blocks
- VBA : The method AddAttributeDef doesn’t assign current layer to entity
- VBA : fixed several VBA methods
- VBA : Block.Delete method is not supported
- Restored default settings : User can restore only Menu or Toolbar
- Removed message prompt for searching missing references
- Added SNAPGRIDLEGACY variable to constrain cursor movement to GRID also when no command or selection active (default is off)
- Added CTRL+ENTER to press OK button to close EATTEDIT dialog
- Improved selection of attributes in EATTEDIT dialog directly on double clicked
- Fixed crash pressing OK in print dialog
- Fixed crash using property palette
- Improved ability to cancel search of closed boundary in hatch dialog
- Improved closed area recognition fixing various deadlocks and improved algorithm
- Changed CH alias to ENTPROP command
- Fixed filter names after creation in LAYERS dialog
- Fixed paths tab in options dialog
- VBA : Fixed property closed on object LWPolyline.
- Added progressbar in hatch area compute and increased ESC management (also analyzing sub paths)
- Added Autocad 2013-2014 clipboard format to allow PASTECLIP in autocad recent versions
- Added check to avoid crash on COPYCLIP+PASTECLIP in another application
- Fixed LAYFRZ command with dimension
- Fixed crash on ESC on print preview
- Fixed EXTRUDE command with large coordinate
- Fixed direction of extrusion
- Fixed search order for SHX files, now pcad first searches in drawing folder then in other search paths
- Changed plot header and footer separator char from “,” to “|”
- Fixed API to set overridden plotting configurations
- Fixed crash when dimassoc = 0 dimlinear doesn’t work.
- Fixed DWFOUT command, now uses dialog to choose filename and uses parameters in dialog
- Fixed VIEWPOINT command removing ESNAP when user type coordinates on keyboard
- Fixed display of RECOVER message loading a corrupted file with double click
- Removed plot length limit from paper size
- Fixed attribute edit during INSERT command
- Fixed INSERT with NWUCS
- Fixed margins for plotters with large paper size (A1 etc.) removed PRINTAUTOROTATE variable behavior
Changelog version 13.0.12
- Fixed change of path of images
- Updated PDF Printer to Amyuni Document Converter 4.5.3.3
- Fixed COPYBASE temporary removed grips before selecting base point
- Added TEXSIZEGRANULARITY to change size of texture used as drawing plane
- Fixed TXTEXP crash AVicad selecting all drawing
- Added MINOPENGL variable to set minimal OPENGL version requirement to activate HW display system
- Added some missing SHX fonts duplicating and renaming existing and updated icad.fmp
- Fixed _VIEW (R option) that makes always visible UCS icon
- Removed confirm question creating an existing view using command -VIEW (W option) like autocad and AVicad 2011
- VBA : Fixed Lock property in Layer object
- Changed drag of dxf files now it uses DRAGOPEN variable to choose to open or to insert a dxf file
- Fixed load of old,bad CTB files made by old version of intellicad
- Fixed POLYLINE command with negative angles and using always same angle values
- Fixed display of images in NWUCS
- Fixed all profiles problems
- Added setting to force NVIDIA GPU to work with AVicad with notebook with dual GPU
- Fixed copyclip and paste in word
- Fixed OBject option in UCS command
- Fixed etrack point acquisition with NWUCS
- Fixed command ìConvert to Meshî(3DCONVERT)
- Added option to -TOOLBAR command to permit to delete all toolbars
- Changed PICKBOXCOLOR to 7 (white) as default
- Added delete option to -TOOLBAR command
- Fixed VBA method SelectByPolygon.
- Fixed usage of “=” in -INSERT command
- Added SETATT function in AVicad.lsp
- Fixed -INSERT command from menu with spaces instead of ‘;’, path for blocks should use ” to describe paths with spaces inside
- Fixed redefinition of blocks only using “=” in -INSERT command
- Added check on already protected scripts in LispDefender
- Fixed VIEWRES (ZOOMPERCENT), SPLINESEGS, FACETRES and ISOLINES variables in the CONFIG DISPLAY dialog
- Fixed open of dwg files version 2013 that needs recover after conversion
- VBA: Fixed “New” of Point, Matrix, Vector, Points
- Fixed name of printed document to allow print of PDF files
- Grouped toolbar in popup menu
- Fixed the bug with HATCH editing angle set
- Fixed load of toolbar used also as flyout
- Fixed getpoint with ortho from lisp
- Fixed “inherits properties” in hatch dialog now after use it once you can change properties
- Added readalisfile function (available in lisp)
- Fixed ETrack with TAN points
- Fixed compounded (deferred) tangent between two circles (or arcs)
- Fixed print of drawings with non ANSI chars (czech) using our PDF printer
- Added ICAD environment variable management to set search paths
- Fixed maximum length to 256 chars of command in imagemenu button
- Added /perf parameter to log cursor display time
- fixed for wireframe 3D printing problem
- Fixed access violation on preview.
- Reenabled scrollbars
- Fixed load of flyout images from a dll
- Added message to ask to overwrite a file in WBLOCK dialog
- Fixed set of viewport visualstyle and removed useless shadeplot
- Fixed menu check of UCSICON commands
- Added “.dwg” to file name in wblock dialog
- Was removed error message when requested menu wasn’t found. (menucmd function does not require any massage)
- Fixed background color and position of entities in pasted objects in Word
- Improved copyclip and paste in word
- Fixed COPYCLIP and CUTCLIP to copy only selected object
- Fixed crash reloading a toolbar with missing flyout
- Fixed greyvar for UCSICON commands in menu
- Fixed crash after selecting a command from nested flyout in another flyout
- Added ConfigurePrinters command, changed a menu item, changed a string in the CONFIG dialog
- Fixed esnap EXT without any other esnap
- Fixed load of nested flyout
- Fixed Etrack point acquisition with INT and END esnap
- Fixed performance searching files in network
- Changed ESNAP menu in status bar, added EXTENSION snap and fixed APPARENT
- Fixed hang on WBLOCK and crash closing AVicad
- Fixed TXT2MTXT bug with BYBLOCK color assignment
- Fixed show of application during edit of embedded OLE object in other application (office/autocad)
- Fixed open of embedded object in other application (autocad/office)
- The REFEDIT toolbar get hidden at the end of REFEDIT command only if it was opened by the REFEDIT command and wasn’t already visible by its own
- Added base.dcl to translate base tiles of dcl dialogs
- Now base.dcl file is being first loaded from AViCAD root folder and if not found there – loaded from the resources
- Added check on easyarch commands to avoid problems when there isn’t open drawing
- Fixed crash selecting a dimension in a drawing with errors
- Fixed PNEW preview image overlapping with bitmaps
- Fixed the context menu appearing on “More” button in MTEXT dialog
- Added “VBA missing” message on BATTMAN and other vba commans
- Removed default values from ddattdef dialog and restored original sentence in command line version -ATTDEF
- Fixed the Bullets and Lists changes in multi text editing
- Changed list of command to exclude Recovery manager file recorder
- Changed network path resolver to use different api to solve problems opening files on some NAS and other operating systems
- Added “Zoom Fit” button to the print preview dialog
- Fixed “Select Entities” button in properties palette
- Changed color to white of background color in pasted image
- Fixed Recovery manager to ignore “false saves” during COPYCLIP and COPYBASE commands
- Localized some strings in -IMAGEATTACH command
- Fixed memory problem selecting image extension from file dialog in ATTACH command
- World to paper space calculation is fixed for both linear and aligned dimensions.
- Improved ESNAP perfromance in drawing with image and GRID active
- Text with zero height can be created if switch text styles using toolbar
- [VBA]Filtering of the entity does not work with SelectionSet.
- Incorrect NEAREST snapping to arc if viewpoint is non planar and UCS is not world
- Entity Properties toolbar should work regardless of PICKFIRST system variable
- Fixed VIEWPOINT Crash
- Can’t select drawing file version in WBLOCK dialog
- Cannot to switch to PSpace by double click if something is selected inside viewport
- Some entities in NWUCS are not being handled properly by (trans), Fix for Chamfer, Divide, Solid.
- Aligned dimension shows incorrect text for MSPACE entities in PSPACE
- ICAD cannot save drawing in some formats
- Moving a grip intellicad freeze
- Maximal possible value of AUTOSNAP variable shouldn’t be tied to default value
- Fixed printing of large google earth imported images
- Perpedicular snap doesn’t work properly
- Strange behavior when you edit a text
- Fixed STYLE / EXPSTYLES – font “(not found)” error message is not true
- Incorrect Nearest snapping to NWUCS mspace Spline in Layout
- HATCH created with wrong elevation in NWUCS
- Offset problem using esnaps
- The stretch command does not allow a multiple window selection
- WP selection doesn’t work properly for NW view
- Switching ORTHO with F8 is not working for LISP commands
- The stretch command does not allow a multiple window selection
- Crash during LINETYPE command
- If you execute an INSERT and press RMB then RTCAN has to be returned
- The stretch command does not allow a multiple window selection
- Linetypes with dots loose the dots on display
- “_solidedit” command. You can’t use a negative angle value to rotate a face
- The stretch command does not allow a multiple window selection
- Some block entities are not printed correctly in attached drawing
- MASSPROP command ignores UCS
- ^P (menu echo) used in menus will cause an extra return when the menu item is activated
- ICAD LISP interpreter is slower than ACAD
- During placement the INSERT command creates a temporary entity in combination with OSMODE = 512
- Redefine existing block does not work properly
- The stretch command does not allow a multiple window selection
- Wipeout frame is now always plotted
- Audit errors are reported for text style with height = 0
- SDS app which creates block table record failing with SPLINE, HATCH and curved POLYLINE.
- INSERT with angle 0 is not previewed and placed at angle 0
- [VBA] CAD crashes when adding an XDATA in “SetXData” method.
- sds_initget/sds_getpoint combination should return RTKWORD
- Added missing XLIST command
- The Stretch command doesn’t work on HATCH
- _DTEXT , left-click inserts text
- -PLOT command should work also with uppercase printer name from scripts
- Creating ARC TANGENT issue
- The value 360 degrees for Rotation angle is accepted
- Record name duplication in AutoLinetypes table is not checked in COM interface
- (EntMake) of polyline inside a block fails when returning SEQUENCEEND
- OSNAP lisp function returns incorrect value for NWUCS MSPACE entities in Layout
- [VBA] CAD crashes when you set the text to “TextString” property.
- Record name duplication in AutoLayers table is not checked in COM interface
- _DTEXT , left-click inserts text
- Record name duplication in AutoDimensionStyles table is not checked in COM interface
- Record name duplication in AutoBlocks table is not checked in COM interface
- Incorrect behavior ARC / Follow option after erasing previously created ARC
- PLATFORM sysvar is not supported correctly, it returns and empty string.
- Text Middle-Center Justification issue
- Polar does not work fine using a rotated UCS
- I just ran an audit and had 16 errors. I ran again to fix errors and the crash report appeared
- Insert fails when the file path doesn’t contains the extension
- SAVEAS – Default Save As Format Option not honoured when FILEDIA Off
- With ANGBASE=90, the rotation of the asixs is not correct
- Issue during linetype typeing
- Inserting Hatch problem
- It is not possible to create an OdDbMaterial object via (entmake).
- ICAD’s window becomes unfocused after turning the current layer off through the entity properties toolbar
Changelog version 13.0.10
- Fixed save of position of toolbars
- Fixed a bug with 0 gap tolerance in hatch dialog
- Fixed property bar using visual styles from drawing not old visualization configurations
- Fixed viewport ucsicon using ROTATE and INSERT commands
- Fixed visualization of available commands in menu and toolbar customization dialog
- Added “Open containing folder” command to window menu
- Fixed position of UCSIcon changing viewpoint
- Fixed some crashes on edit and creation commands
- Fixed UCS bug with international options like _FRONT, _TOP, etc
- Fixed UCS II toolbar, added new buttons
- Fixed crash using snap CEN on some surfaces
- Improved cursor speed when esnap is on, grid is off and at least one image is inserted
- Fixed illumination factor for Easyarch windows
- Fixed the bug with BYLAYER color selection in DDEDIT dialog
- Fixed the bug with layer rename while creating the layer with a group active
- Fixed hang after problem editing grip of a polyline
- Fixed plotting window specification with ORTHO ON
- Fixed perpendicular esnap with UCS different from global
- Fixed POLAR with UCS not world
- Added esnap menu to esnap context menu in status bar
- Fixed Ortho and Polar on first point
- Fixed insert image into layout
- Fixed Direct Distance Entering with grips
- Added use of Direct distance entering using ETrack points
- Fixed printing image with setting FADE(image property)
- Fixed @ operator.
- Improved Paper space esnap
- Fixed the bug with LAYERS dialog on creating new drawing
- Fixed freeze on QDIM command
- Fixed the bug with GAP TOLERANCE in BHATCH dialog. Added a variable to remember the BHATCH dialog width
- Fixed the bug with a horizontal line in the ruler in the MTEXT dialog
- Fixed the bug with layer rename and implemented the assignment of a layer to a selected group filter
- Fixed paper space esnap and improved etrack functions
- Center snap is not detected is move the cursor to the center of a circle located in a viewport
- PASTESPEC to have more choices when pasting region from Excel
- Some snaps are not detected if enable Nearest and Extension snaps
- Only two quadrant snaps are detected for a circle in a viewport
- Nearest snap glyph is not displayed if enable Nearest and Parallel snaps
- Wrong snap is detected if enable parallel, intersection and tangent snaps
- PEDIT -> Edit vertices, glyph does not show until mouse is moved
- Fixed DIMRADIUS on TTR trimmed circle get dim text mirrored
- When Autocomplete feature is enabled – it may cause to impossibility to choose the drawing in file dialog
- LIST should display the material if it is not By layer
- unable to define a circle specifing its radius (inches value)
- Entities doesn’t appear after undo of hide layer using Explorer
- MASSPROP Incorrect “Bounding Box” field’s value after saving
- VPLAYER to support wildcards in layer names
- -Layer does not print a message when trying to freeze the current
- Fixed creation of an OdDbMaterial object via (entmake)
- Fixed crash in ESNAP on polyline during ROTATE and view rotating with CTRL+Mouse
- LISP – Not equal [ /= ] does not work properly in case of lists
- Graphic disappears if run 3DORBIT and grab left/right circle on the rotation sphere
- Fixed Crash during print
- Fixed MTEXT tabulation in MTEXT editor
- COPY command with enabled ortho creates wrong entity
- STYLE command can lead to deadlock and data loss on Escaping
- ATTEXT – Cannot extract attribute data from a dwg.
- With esnap extension can’t acquire etrack point using Mid
- Pressing ESC on INSERT command ads returned code is RTNORM not RTCAN
- Redefine existing block does not work properly
- The TAG of attributes and AttDefs are not created in Uppercase
- LISP (entget) doesn’t extract XDATA for entities in attached drawing
- Changing the background color is not updated all open drawings
Changelog version 13.0.8
- Fixed REVOLVE command.
- Set to OFF the default value of ìDisplay Snap aperture boxî and ìAuto snap magnetî.
- Changed command ìSelect Allî to ìSelect mainî that enables End, Cen, Mid, Nod, Per, Qua, Int, Ins esnaps.
- Fixed add of etrack point with etrack OFF and EXTension point only on end of entity.
- Fixed add of etrack points with active PAR and EXT.
- Fixed crash setting layer name with trailing space.
- Fixed crash changing color to a white layer.
- Fixed the problem with angle resetting in EXTRUDE command.
- Fixed PERP priority in standard use (non in deferred mode).
- Fixed ORTHO issue with copy command.
- Fixed problem creating block with ending space.
- Fixed toolbar and menu command: set all layers of/on, freeze/thaw.
- Fixed the problem with thumbnail display in new wizard dialog.
- Fixed problem setting ORTHO after command is started.
- Fixed MID point with INT or APPINT.
- Fixed osnap PERP tracking line when UCS is rotated.
- Fixed priority of TAN and PERP over other esnaps.
- Fixed UCS command after delete of active UCS with VBA Fixed CIRCLE TTR.
- Fixed crash using some esnap in some situation drawing arcs Updated EasyArch foreign files.
- Added FINDTEXTINT variable to remove intersection esnap between texts.
- Fixed insert of image using current UCS like autocad.
- Added Easyarch manual for foreign languages.
- Fixed INT esnap when PAR is on, now it displays right glyph.
- Fixed ETRACK acquisition with EXT enabled.
- Fixed method InsertBlock(VBA) on inserting from file.
- Fixed crash using esnap TAN over hatches.
- Fixed crash using TAB to cycle through esnap.
- Fixed use of parallel snap, now pcad displays parallel esnap only one time and after is ignored.
- Fixed PERP esnap with ORTHO.
- Fixed several bugs with groups filter in layer dialog.
- Fixed activation of new PDF printer when drawing are set to old version.
- Fixed Enter key on first dialog in EATTEXT.
- Fixed saving UNICODE files.
- Fixed crash drawing line over other line with ETRACK and apparent intersection.
- Fixed Dim Unit and Alt Format selection in the properties palette of the DIMENSION entity.
- Added check to remove excessive and useless layer filters (when layer filters are more than layers).
- Implemented a block selection dialog in case of REFEDIT on nested blocks.
- Fixed the fact that ìSelect Allî and ìClearî buttons were influencing ìDisable Entity Snapsî in the Snaps dialog.
- Fixed reload on layer list in some circumstances.
- Fixed problems with AIDIMPREC and AIDIMTEXT with DIMENSION entities
- Fixed an error on external dimensioning for easyarch.
Changelog version 13.0.6
- Fixed crash drawing line over other line with ETRACK and apparent intersection
- Fixed crash in lisp function
- Fixed an error on external dimensioning for easyarch
- Fixed crash moving cursor closing a drawing
- Added a check to avoid division by 0
- selection doesn’t set LASTPOINT variable like othercad
- Fixed EntGetx, now it read any application name.
- Changed LOGFILEMODE to 1 by default
- Fixed MOVE command with ORTHO, now selection input doesn’t update LASTPOINT variable (as ACAD)
- Fixed crash renaming a property layer filter
- Implemented /L command line option to hide the splash screen
- Fixed X Y and Z scale in the INSERT dialog when Uniform scaling is OFF
- Fixed SURFACE name in the properties palette
- Fixed crash with ESNAP over some spline entities
- Fixed QKUNGROUPM command and delete SELECT GROUP from GROUP toolbar
- Fixed BLOCK from objects option, default value and value saving and restoring
- Implemented ETRACKDELAY (default to 200 ms) to delay etrack points acquisition
- Fixed CIRCLE, ARC and ELLIPSE commands in DRAW toolbar
- Changed default ACADLSPASDOC from 0 to 1. Now, icad.lsp is reloaded every time a drawing opens.
- Fixed REVOLVE command with polylines, spline, arcs ovelapping or started from revolution axis